Device Presentation THL36 is a digital thermostat usable for simple temperature regulation (heating or cooling). It is fully programmable from the front side. The device can be used with 2 or 3 wires PT100 sensors or with J, K, T thermocouple, temperature com- pensated.
- low threshold detection (heating): .alarm is activated when temperature goes below threshold, .alarm is removed when temperature goes above threshold plus hysteresis. LOREME 12, rue des Potiers d'Etain - 57071 Metz 03.87.76.32.51 - Fax 03.87.76.32.52 - Email: Commercial@Loreme.fr - Technique@Loreme.fr...
TABLE OF CONTENTS The configuration possibilities are: ‘AHi’ - High detection with the display ‘ALo’ - Low detection with the display The actual configuration is displayed on topic access. Pressing button validates the displayed choice and ends the configuration. Press button to display next choice.
- It is advisable to separate the input / output lines from the power supply lines in order to avoid the coupling phenomena. - It is also advisable to limit the lengths of data cables as much as possible. LOREME 12, rue des Potiers d'Etain - 57071 Metz 03.87.76.32.51 - Fax 03.87.76.32.52 - Email: Commercial@Loreme.fr - Technique@Loreme.fr...
Page 7
TABLE OF CONTENTS Wirings / Outline dimensions Power supply terminals 7 & 8. Relay terminals Work (10), Rest (11), Common (12). PT100 input terminals 4(+), 5(-), 6(line). Thermocouple input terminals 4(+), 5(-).