1. Manuals
  2. Brands
  3. Flying Voice Manuals
  4. Network Router
  5. G802
  6. User manual

Flying Voice G802 User Manual

Hide thumbs Also See for G802:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Flying Voice G802

Summary of Contents for Flying Voice G802

  • Page 2: Table Of Contents

    Part 15 FCC Rules..........................4 Class B Digital Device or Peripheral....................4 Warnings and notes............................ 5 Warnings..............................5 Notes..............................5 Chapter 1:Product description..........................6 G802/G902..............................7 LED Indicators and Interfaces........................8 Hardware Installation..........................11 Voice Prompt..............................13 Chapter 2:Configuring Basic Settings........................18 Two-Level Management..........................19 Web Management Interface......................19...
  • Page 3 Contents Wireless 5G..............................67 SIP................................68 FXS1................................76 FXS2................................86 Security...............................87 Application..............................90 Storage............................... 92 Administration............................95 Management............................. 95 Firmware Upgrade.......................... 100 Provision............................101 SNMP............................... 103 TR-069............................. 104 Diagnosis............................106 Operating Mode..........................108 System Log............................109 Logout..............................109 Reboot............................. 109 Chapter 4:IPv6 address configuration on WAN interface................110 Introduction.............................111 IPv6 Advance...........................
  • Page 4 Table Tables Table 1 Features at-a-glance............................ 7 ........................... 8 Table 2 LED Indicators Table 3 Interfaces..............................10 Table 4 Voice Menu Setting Options........................13 Table 5 Web management interface........................21 Table 6 Setting time zone............................22 Table 7 Configuring an internet connection......................23 Table 8 Wireless >...
  • Page 5 Table Table 35 Wireless Access Policy..........................60 Table 36 WMM............................... 61 Table 37 WDS................................62 Table 38 WPS................................63 Table 39 Station info...............................64 Table 40 Advanced..............................65 Table 41 SIP settings...............................68 Table 42 VoIP QoS..............................69 Table 43 Parameters and settings..........................70 Table 44 Adding one dial plan..........................
  • Page 6 Table ............................105 Table 75 TR069 Table 76 Diagnosis..............................107 Table 77 Operating mode.............................109 Table 78 System log..............................110 Table 79 Logout..............................110 Table 80 IPv6 Modes............................112 Table 81 Enabling IPv6............................113 Table 82 Configuring Statefull IPv6........................114 Table 83 Configuring Stateless IPv6........................115...

  • Page 7: About This User Guide

    About this user guide About This User Guide Thank you for choosing G802 /G902 wireless router with VoIP. This product will allow you to make ATA call using your broadband connection, and provides Wi-Fi router function.This manual provides basic information on how to install and connect G802/G902 wireless router with VoIP to the Internet.

  • Page 8: Contacting Flyingvoice

    About this user guide Contacting FlyingVoice Main website: http://www.flyingvoice.com/ Sales enquiries: sales1@flyingvoice.com Support enquiries: support@flyingvoice.com Hotline: 010-67886296 0755-26099365 Address: Room508-509, Bldg#1, Dianshi Business Park, No.49 BadachuRd,Shijingshan District, Beijing, China...

  • Page 9: Purpose

    About this user guide Purpose The documents are intended to instruct and assist personnel in the operation, installation and maintenance of the FlyingVoice equipment and ancillary devices. It is recommended that all personnel engaged in such activities be properly trained.FlyingVoice disclaims all liability whatsoever, implied or express, for any risk of damage, loss or reduction in system performance arising directly or indirectly out of the failure of the customer, or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or recommendations made in this document.

  • Page 10: Declaration Of Conformity

    About this user guide Declaration of Conformity Part 15 FCC Rules This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  This device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Warnings And Notes

    About this user guide Warnings and Notes The following describes how warnings and notes are used in this document and in all documents of the FlyingVoice document set. Warnings Warnings precede instructions that contain potentially hazardous situations. Warnings are used to alert the reader to possible hazards that could cause loss of life or physical injury.

  • Page 12: Chapter 1:Product Description

    Chapter 1: Product description Chapter 1: Product description This chapter covers: · G802/G902 · LED Indicators and Interfaces · Hardware Installation · Voice Prompt...

  • Page 13: G802/G902

    Chapter 1: Product description G802/G902 Table 1 Features at-a-glance Port/Model G802 G902 picture Speed limit NAT Ethernet 5* RJ45 5* RJ45 interface 10/100M 10/100/1000M T.30, T.38 Fax WiFi 2.4G 2T2R (300Mbps) 2.4G 2T2R(300Mbps) 5G 2T2R(867Mbps) Voice Code G.711 (A-law, U-law), G.729A/B, G.723, G.722 (Wide band)

  • Page 14: Led Indicators And Interfaces

    Chapter 1: Product description LED Indicators and Interfaces Table 2 LED Indicators G802 Status Explanation Blinking (Green) Not registered PHONE1/2 On (Green) Registered On (Green) The port is connected with 5G The port is disconnected Blinking (Green) It will blink while transmitting data.
  • Page 15 Chapter 1: Product description On (Green) The router is powered on and running normally. POWER The router is powered off. RESET Restore the factory settings button, press and hold the device after 5s to restore the factory settings G902 Status Explanation On (Green) The port is connected with USB...

  • Page 16: Table 3 Interfaces

    Chapter 1: Product description Table 3 Interfaces G802 Interface Description POWER Connector for a power adapter Phone1/2 ATA Analog phone connector Connector for accessing the Internet LAN 1/2/3/4 Connectors for local networked devices G902 Interface Description POWER Connector for a power adapter...

  • Page 17: Hardware Installation

    Chapter 1: Product description Hardware Installation Before configuring your router, please see the procedure below for instructions on connecting the device in your network. Procedure 1 Configuring the Router Connect analog phone to ATA Port with an RJ11 cable. Connect the WAN port to the Interne your network’s modem/switch/router/ADSL equipment using an Ethernet cable.
  • Page 18 Chapter 1: Product description Warning Changes or modifications not expressly approved by the party responsible for compliance can void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 19: Voice Prompt

    Chapter 1: Product description Voice Prompt The devices may be configured by navigating the unit’s voice menu. By using your phone and dialing a sequence of commands, the device may be configured for operation. Each device configuration section may be accessed by entering a certain operation code, as shown below. Table 4 Voice Menu Setting Options Operation Menu Navigation...
  • Page 20 Chapter 1: Product description Pick up phone and press “****” to start IVR Choose “2”, and The router reports current WAN Port IP Address Input the new WAN port IP address and press “#” key: Use “*” to replace “.”, for exampleuser can input 192*168*20*168 to set the new IP address 192.168.20.168 WAN Port IP Press # key to indicate that you have finished...
  • Page 21 Chapter 1: Product description Pick up phone and press “****” to start IVR Choose “5”, and the router reports current DNS Input the new DNS and press # key: Use “*” to replace “.”, user can input 192*168*20*1 to set the new gateway 192.168.20.1.
  • Page 22 Chapter 1: Product description Pick up phone and press “****” to start IVR Choose “8”, and the router reports “WAN Port Login” Prompt "Please enter password", the method of inputting password is same as WAN Port operation 1. Login If user wants to quit, press “*”. Pick up phone and press “****”...
  • Page 23 Chapter 1: Product description Note While using Voice menu, press * (star) to return to main menu. If any changes made in the IP assignment mode, the router must be rebooted in order for the settings to take effect. While entering an IP address or subnet mask, use "*" (star) to enter "." (Dot) and use "#" (hash) key to finish entering IP address or subnet mask: For example, to enter the IP address 192.168.20.159 by keypad, press these keys: 192*168*20*159, use the #(hash) key to indicate that you have finished entering the IP...

  • Page 24: Chapter 2:Configuring Basic Settings

    Chapter 2: Configuring Basic Settings This chapter covers:  Two-Level Management  Web Management Interface Configuring   Making a Call...

  • Page 25: Two-Level Management

    Chapter 2: Configuring Basic Settings Two-Level Management This section explains how to setup a password for an administrator or user and how to adjust basic and advanced settings. FWR9502 supports two-level management: administrator and user. For administrator mode operation, please type “admin/admin”...
  • Page 26 Chapter 2: Configuring Basic Settings Note If you are unable to access the web configuration, please see Chapter 5: Troubleshooting Guide for more information. The web management interface automatically logs out the user after 5 minutes of inactivity. Logging in from the WAN port Ensure your PC is connected to the router’s WAN port correctly.

  • Page 27: Web Management Interface Details

    Chapter 2: Configuring Basic Settings Web Management Interface Details Table 5 Web management interface Field Name Descripti Top Navigation bar Click an option in Top Navigation bar (area marked as “1”). Multiple options in the Sub-navigation bar are displayed Sub-navigation bar Click the Sub-navigation bar to choose a configuration page (area marked as “2”) Parameter configuration...

  • Page 28: Setting The Time Zone

    Chapter 2: Configuring Basic Settings After changing the parameters need to click this button to save&apply, modify the parameters immediately take effect. Any time changes are made click "Save" to confirm and save the changes. On click of “Save” button, a red message will be displayed as shown below to notify a reboot.

  • Page 29: Configuring An Internet Connection

    Chapter 2: Configuring Basic Settings Configuring an Internet Connection From the Network > WAN page, WAN connections may be inserted or deleted. For more information on Internet Connection setting, see Table 10below. Table 7 Configuring an internet connection Field Name Description Connect Name Use keywords to indicate WAN port service model (the parameters are defined...
  • Page 30 Chapter 2: Configuring Basic Settings VLAN ID Note Multiple WAN connections may be created with the same VLAN ID DNS Mode Select DNS mode, options are Auto and Manual: When DNS mode is Auto, the device under LAN port will automatically obtains the preferred DNS and alternate DNS.

  • Page 31: Setting Up Wireless Connections

    Chapter 2: Configuring Basic Settings Setting up Wireless Connections To set up the wireless connection, please perform the following steps. Enable Wireless and Setting SSID Open Wireless > Basic webpage as shown below: Table 8 Wireless > Basic web page (user view) Field Name Description Select “Radio Off”to disable wireless operation...
  • Page 32 Enabled: The device SSID is broadcast at regular intervals Disabled: The device SSID is not broadcast at regulatr intervals, broadcast(SSID) disallowing wi-fi clients from automatically connecting to the G802/G902 Enabled: Devices connected to different SSIDs are isolated from each other. AP Isolation...

  • Page 33: Table 9 Wireless Security Web Page

    Chapter 2: Configuring Basic Settings Encryption Open Wireless/Wireless Security webpage to configure custom security parameters. Table 9 Wireless Security web page Field Name Description SSID Choice Choose the SSID from the drop-drown list for which security will be configured Select an appropriate encryption mode to improve the security and privacy of your wireless data packets.

  • Page 34: Configuring Session Initiation Protocol (Sip)

    Chapter 2: Configuring Basic Settings Configuring Session Initiation Protocol (SIP) SIP Accounts The device have 2 FXS ports to make SIP (Session Initiation Protocol) calls. Before registering, the device user should have a SIP account configured by the system administrator or provider. See the section below for more information.
  • Page 35 Chapter 2: Configuring Basic Settings Note Upon the following dialogue: Please press button to make changes effective.

  • Page 36: Table 11 Registration Status

    Chapter 2: Configuring Basic Settings Viewing the Registration Status Table 11 Registration status Procedure To view the SIP account status of device, open the Status webpage and view the value of registration status.

  • Page 37: Making A Call

    Chapter 2: Configuring Basic Settings Making a Call Calling phone or extension numbers To make a phone or extension number call:  Both ATA and the other VoIP device (i.e., another ATA or other SIP products) must have public IP addresses, or ...

  • Page 38: Blind Transfer

    Chapter 2: Configuring Basic Settings Blind Transfer Assume that call party A and party B are in conversation. Party A wants to Blind Transfer B to C: Party A dials “*98” to get a dial tone, then dials party C’s number, and then press immediately key # (or wait for 4 seconds) to dial out.

  • Page 39: Chapter 3:Web Interface

    Chapter 3: Web Interface This chapter guides users to execute advanced (full) configuration through admin mode operation. This chapter covers:  Login  Status  Network and Security  Wireless   FXS1  FXS2  Security  Application  Administration Management ...

  • Page 40: Login

    Chapter 3: Web Interface Login Table 12 Login details Procedure 1. Connect the LAN port of the router to your PC an Ethernet cable 2. Open a web browser on your PC and type http://192.168.1.1. 3. Enter Username admin and Password admin. 4.

  • Page 41: Status

    Chapter 3: Web Interface Status Table 13 Status Page...
  • Page 42 Chapter 3: Web Interface...
  • Page 43 Chapter 3: Web Interface Description This webpage shows the status information about the Product, Network, and System including Product Information, SIP Account Status, FXS Port Status, Network Status. Wireless Info and System Status...

  • Page 44: Network And Security

    Chapter 3: Web Interface Network and Security You can configure the WAN port, LAN port, DDNS, Multi WAN, DMZ, Port Forward and other parameters in this section of the web management interface. This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one WAN mode and then the corresponding page will be displayed.

  • Page 45: Table 15 Dhcp

    Chapter 3: Web Interface DHCP The Router has a built-in DHCP server that assigns private IP address to each local client. The DHCP feature allows to the router to obtain an IP address automatically from a DHCP server. In this case, it is not necessary to assign an IP address to the client manually.

  • Page 46: Table 16 Pppoe

    Chapter 3: Web Interface PPPoE PPPoE stands for Point-to-Point Protocol over Ethernet. It relies on two widely accepted standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable modem. All the users over the Ethernet can share a common connection. PPPoE is used for most of DSL modem users.
  • Page 47 Chapter 3: Web Interface Confirm Password Enter your PPPoE password again Service Name Enter a service name for PPPoE authentication. If it is left emply, the service name is auto detected. Operation Mode Select the mode of operation, options are Keep Alive, On Demand and Manual: When the mode is Keep Alive, the user sets the 'keep alive redial period' values range from 0 to 3600s, the default setting is 5 minutes;...

  • Page 48: Table 17 Bridge Mode

    Chapter 3: Web Interface Bridge Mode Bridge Mode under Multi WAN is different with traditional bridge setting. Bridge mode employs no IP addressing and the device operates as a bridge between the WAN port and the LAN port. Route Connection has to be built to give IP address to local service on device.
  • Page 49 Chapter 3: Web Interface DHCP packet from the WAN interface to the LAN interface. Local DHCP service will not allocate IP to clients of LAN port. Local Service Gateway will not forward DHCP packets between LAN and WAN, it also blocks DHCP packets from the WAN port.

  • Page 50: Lan

    Chapter 3: Web Interface LAN Port NAT translates the packets from public IP address to local IP address to forward packets to the proper destination. Table 18 LAN port Field Name Description IP Address Enter the IP address of the router on the local area network. All the IP addresses of the computers which are in the router’s LAN must be in the same network segment with this address, and the default gateway of the computers must be this IP address.
  • Page 51 Chapter 3: Web Interface DHCP Start Address Enter a valid IP address as a starting IP address of the DHCP server, and if the router’s LAN IP address is 192.168.11.1, starting IP address can be 192.168.11.2 or greater, but should be less than the ending IP address. DHCP End Address Enter a valid IP address as an end IP address of the DHCP server.

  • Page 52: Table 19 Dhcp Server Settings

    Chapter 3: Web Interface DHCP Server The router has a built-in DHCP server that assigns private IP address to each local client. DHCP stands for Dynamic Host Configuration Protocol. The router, by factory default acts a DHCP server for your network so it automatically dispatches related IP settings to any local user configured as a DHCP client.

  • Page 53: Table 20 Dhcp Server, Dns And Client Lease Time

    Chapter 3: Web Interface Table 20 DHCP server, DNS and Client Lease Time Field Name Description Specify the Primary DNS address provided by your ISP. If your ISP does not provide it, the router will automatically apply default DNS Server IP address: 202.96.134.33 Primary DNS to this field.

  • Page 54: Table 22 Port Forward

    Chapter 3: Web Interface Field Name Description VPN Enable Enable/Disable VPN. If the VPN is enabled, user can select PPTP,open VPN and L2TP mode VPN. Initial Service IP Enter VPN server IP address. User Name Enter authentication username. Password Enter authentication password. Port Forward Table 22 Port Forward...

  • Page 55: Table 23 Vlan

    Chapter 3: Web Interface Field Name Description Comment Sets the name of a port mapping rule or comment IP Address The IP address of devices under the LAN port Port Range Set the port range for the devices under the LAN port. (1-65535) Protocol You can select TCP, UDP, TCP &...

  • Page 56: Table 24 Dmz

    Chapter 3: Web Interface Table 24 DMZ Field Name Description DMZ Enable Enable/Disable DMZ. DMZ Host IP Address Enter the private IP address of the DMZ host. Table 25 QoS...

  • Page 57: Table 26 Port Setting

    Chapter 3: Web Interface Field Name Description QoS Enable Enable/Disable QoS function Upstream Set the upstream bandwidth Downstream Set the downstream bandwidth Delete Selected In NO., Check the items you want to delete, click the Delete option Click Add to add a new parameter Note From system release 4.2 or later, the QoS bandwidth can be configured for Upstream and Downstream...

  • Page 58: Table 27 Port Setting

    Chapter 3: Web Interface Port Setting Table 27 Port setting Field Name Description WAN Port speed Nego Auto-negotiation, options are Auto, 1000Mbps full, 100Mbps Full, 100Mbps Half, 10Mbps Full, 10Mbps Half. LAN1~LAN3 Port Speed Auto-negotiation, options are Auto, 1000Mbps full, 100Mbps Full, 100Mbps Nego Half, 10Mbps Full, 10Mbps Half.

  • Page 59: Table 29 Advance

    Chapter 3: Web Interface Advance Table 29 Advance Field Name Description Most Nat connections The largest value which the FWR9502 can provide Mss Mode Choose Mss Mode from Manual and Auto Mss Value Set the value of TCP AntiDos-p You can choose to enable or prohibit IP conflict detection Select enable if enabled, phone IP conflict will have tips or prohibit IP conflict Detecting Interval...

  • Page 60: Wireless2.4G

    Chapter 3: Web Interface Wireless 2.4G Basic Table 30 Basic Field Name Description Radio on/off Select “Radio off” to disable wireless. Select “Radio on” to enable wireless. Wireless connection mode According to the wireless client type, select one of these modes. Default is AP Network Mode Choose one network mode from the drop down list.
  • Page 61 Chapter 3: Web Interface SSID It is the basic identity of wireless LAN. SSID can be any alphanumeric or a combination of special characters. It will appear in the wireless network access list. Multiple SSID1~SSID3 The device supports 4 SSIDs. Hidden After the item is checked, the SSID is no longer displayed in the search for the Wi-Fi wireless network connection list...
  • Page 62 Chapter 3: Web Interface Enabled: Multiple copies of signals are transmitted to increase the chance of successful delivery Aggregation MSDU (A- Enabled: Allows the device to aggregate multiple Ethernet frames into a single MSDU) 802.11n, thereby improving the ratio of frame data to frame overhead Disabled: No frame aggregation is employed at the router Enabled: Multiple frames are acknowledged together using a single Block Acknowledgement frame.

  • Page 63: Wireless Security

    Chapter 3: Web Interface Wireless Security Table 31 Wireless security Field Name Description SSID Choice Choose one SSID from SSID, Multiple SSID1, Multiple SSID2 and Multiple SSID3. Select an appropriate encryption mode to improve the security and privacy of your wireless data packets.Each encryption mode will bring out different web page and ask Security Mode you to offer additional configuration.

  • Page 64: Table 32 Wifi Security Setting

    Chapter 3: Web Interface User can configure the corresponding parameters. Here are some common encryption methods: OPENWEP： A handshake way of WEP encryption, encryption via the WEP key: Table 32 WiFI Security Setting Field Name Description Security Mode This is used to select one of the 4 WEP keys, key settings on the clients should be the same with this when connecting.

  • Page 65: Table 33 Wpa-Psk

    Chapter 3: Web Interface WPA-PSK, the router will use WPA way which is based on the shared key-based . Table 33 WPA-PSK Field Name Description WPA Algorithms This item is used to select the encryption of wireless home gateway algorithms, options are TKIP, AES and TKIPAES.

  • Page 66: Table 35 Wireless Access Policy

    Chapter 3: Web Interface WPA-PSK/WPA2-PSK WPA/WPA2 security type is actually a simplified version, which is based on the WPA shared key mode, higher security setting is also relatively simple, suitable for ordinary home users and small businesses. Wireless Access Policy: Table 35 Wireless Access Policy Field Name Description...

  • Page 67: Table 36 Wmm

    Chapter 3: Web Interface Table 36 WMM Description WMM (Wi-Fi Multi-Media) is the QoS certificate of Wi-Fi Alliance (WFA). This provides you to configure the parameters of wireless multimedia; WMM allows wireless communication to define a priority according to the home gateway type. To make WMM effective, the wireless clients must also support WMM.

  • Page 68: Table 37 Wds

    Chapter 3: Web Interface Table 37 WDS Description WDS stands for Wireless Distribution System, enabling WDS access points to be interconnected to expand a wireless network. WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point with the encryption of WPA and WPA2. It is the simplest way to build connection between wireless network clients and wireless access point.

  • Page 69: Table 38 Wps

    Chapter 3: Web Interface Table 38 WPS Field Name Description WPS Config Enable/Disable WPS function WPS Summary WPS Current Status Display the current status of WPS Display the configure the status information of WPS WPS Configured Display WPS SSID WPS SSID WPS Progress...

  • Page 70: Table 39 Station Info

    Chapter 3: Web Interface WPS Mode PIN：Enter the PIN code of the wireless device which accesses to this LAN in the following option, and press apply. Then router begins to send signals, turn on the PIN accessing method on the clients, and then it can access the wireless AP automatically. PBC：There are two ways to start PBC mode, user can press the PBC button directly on the device, or select PBC mode on the software and apply.

  • Page 71: Table 40 Advanced

    Chapter 3: Web Interface Advanced Table 40 Advanced Field Name Description BG Protection Mode Select G protection mode, options are on, off and automatic. Beacon Interval The interval of sending a wireless beacon frame, within this range, it will send a beacon frame for the information of the surrounding radio network.
  • Page 72 Chapter 3: Web Interface RTS Threshold Specify the packet RTS threshold, when the packet exceeds this value, the router will send RTS to the destination site consultation TX Power Define the transmission power of the current AP, the greater it is, the stronger the signal is Short Preamble Choose enable or disable...

  • Page 73: Wireless 5G

    Chapter 3: Web Interface Wireless 5G Please refer to the wireless 2.4G.

  • Page 74: Sip

    Chapter 3: Web Interface SIP Settings Table 41 SIP settings Field Name Description SIP T1 The minimum scale of retransmission time Max Forward SIP contains Max Forward message header fields used to limit the requests for forwards SIP Reg User Agent Name The agent name of SIP registered user Max Auth The maximum number of retransmissions...

  • Page 75: Table 42 Voip Qos

    Chapter 3: Web Interface Mark All AVT Voice packet marking to enable this item will see the mark on the voice message Packets when the call environment changed (such as press a key during the call) RFC 2543 Call Enable the Connection Information field displays the address is 0.0.0.0 in the invite message of Hold.Disable the Connection Information field displays the device IP Hold address in the invite message of Hold...

  • Page 76: Table 43 Parameters And Settings

    Chapter 3: Web Interface Dial Plan Parameters and Settings Table 43 Parameters and settings Field Name Description Dial Plan Enable/Disable dial plan Line Set the line Digit Map Enter the sequence used to match input number The syntactic, please refer to the following Dial Plan Syntactic Action Choose the dial plan mode from Deny and Dial Out.

  • Page 77: Table 44 Adding One Dial Plan

    Chapter 3: Web Interface Adding one Dial Plan Table 44 Adding one dial plan Description Step 1. Enable Dial Plan Step 2. Click Add button, and the configuration table Step 3. Fill in the value of parameters Step 4. Press OK button to end configuration...

  • Page 78: Table 45 Dial Plan

    Chapter 3: Web Interface Dial Plan Syntactic Table 45 Dial Plan String Description 0 1 2 3 4 5 6 7 8 9 * # Allowed characters Lowercase letter x stands for one legal character To match one character form sequence. For example: [0-9]: match one digit form 0 to 9 [sequence] [23-5*]: match one character from 2 or 3 or 4 or 5 or...

  • Page 79: Table 46 Blacklist

    Chapter 3: Web Interface Blacklist In this page, user can upload or download blacklist file, and can add or delete or edit blacklist one by one. Table 46 Blacklist Description Click to select the blacklist file and to upload it to device; Click to save the blacklist file to your local computer.

  • Page 80: Table 47 Call Log

    Chapter 3: Web Interface Call Log To view the call log information such as redial list , answered call and missed call Table 47 Call log Redial List...
  • Page 81 Chapter 3: Web Interface Answered Calls Missed Calls...

  • Page 82: Fxs1

    Chapter 3: Web Interface FXS1 SIP Account Basic Set the basic information provided by your VOIP Service Provider, such as Phone Number, Account, password, SIP Proxy and others. Table 48 SIP Account - Basic Field Name Description Line Enable Enable/Disable the line. Enable/Disable PEER to PEER.

  • Page 83: Table 49 Audio Configuration

    Chapter 3: Web Interface Outbound Port Outbound Proxy’s Service port, default is 5060 Backup Outbound Port Backup Outbound Proxy’s Service port, default is 5060 Display Name The number will be displayed on LCD Phone Number Enter telephone number provided by SIP Proxy Account Enter SIP account provided by SIP Proxy Password...

  • Page 84: Table 50 Supplementary Service

    Chapter 3: Web Interface G.723 Coding Speed Choose the speed of G.723 from 5.3kbps and 6.3kbps Packet Cycle The RTP packet cycle time, default is 20ms Silence Supp Enable/Disable silence support Echo Cancel Enable/Disable echo cancel. By default, it is enabled Auto Gain Control Enable/Disable auto gain T.38 Enable...

  • Page 85: Table 51 Advanced

    Chapter 3: Web Interface Voice Mailbox Fill in the voice mailbox phone number, Asterisk platform, for example, its default voice Numbers mail is *97 VMWI Serv Enable/Disable VMWI service Enable/Disable DND (do not disturb) If enable, any phone call cannot arrive at the device; default is disable Enter the speed dial phone numbers.
  • Page 86 Chapter 3: Web Interface Field Name Description Domain Name Type If or not use domain name in the SIP URI. Carry Port Information If or not carry port information in the SIP URI. Signal Port The local port of SIP protocol, default is 5060. DTMF Type Choose the DTMF type from Inbound, RFC2833 and SIP INFO.

  • Page 87: Table 52 Volume Settings

    Chapter 3: Web Interface Dial Prefix The number will be added before your telephone number when making calls. User Type Choose the User Type from IP and Phone. Hold Method Choose the Hold Method from ReINVITE and INFO. Request-URI User Check Enable/Disable the user request URI check.

  • Page 88: Table 53 Regional

    Chapter 3: Web Interface Regional Table 53 Regional Field Name Description Tone Type Choose tone type form China, US, Hong Kong and so on Dial Tone Dial Tone Busy Tone Busy Tone Off Hook Warning Tone Off Hook warning tone Ring Back Tone Ring back tone Call Waiting Tone...

  • Page 89: Table 54 Features And Call Forward

    Chapter 3: Web Interface Features and Call Forward Table 54 Features and call forward Field Description Name All Forward Enable/Disable forward all calls Features Busy Forward Enable/Disable busy forward. No Answer Forward Enable/Disable no answer forward. All Forward Set the target phone number for all forward. Call The device will forward all calls to the phone number immediately Forward...
  • Page 90 Chapter 3: Web Interface Transfer key code Call forwarding signatures, default is *98. IVR key code Signatures of the voice menu, default is ****. R key enable Enable/Disable R key way call features. R key cancel code Set the R key cancel code, option are ranged from R1 to R9, default value is R1.

  • Page 91: Table 55 Miscellaneous

    Chapter 3: Web Interface Miscellaneous Table 55 Miscellaneous Field Name Description Codec Loop Current Set off-hook loop current, default is 26. Impedance Maching Set impedance matching, default is US PBX,Korea,Taiwan(600). CID service Enable/Disable displaying caller ID; If enable, caller ID is displayed when there is an incoming call or it won’t be displayed.

  • Page 92: Fxs2

    Chapter 3: Web Interface FXS2 The settings of FXS2 are the same as FXS1. See FXS1 on page 74.

  • Page 93: Security

    Chapter 3: Web Interface Security Filtering Setting Table 56 Filtering setting Field Name Description Filtering Enable/Disable filter function Default Policy Choose to drop or accept filtered MAC addresses Mac address Add the Mac address filtering Dest IP address Destination IP address Source IP address Source IP address Protocol...

  • Page 94: Table 57 Content Filtering

    Chapter 3: Web Interface Content Filtering Table 57 Content filtering Page...
  • Page 95 Chapter 3: Web Interface Field Name Description Filtering Enable/Disable content Filtering Default Policy The default policy is to accept or to prohibit filtering rules Current Webs URL Filters List the URL filtering rules that already existed (blacklist) Delete/Cancel You can choose to delete or cancel the existing filter rules Add a URL Filter Add URL filtering rules Add/Cancel...

  • Page 96: Application

    Chapter 3: Web Interface Application Advance NAT Table 58 advance NAT Description Enable/Disable these function(FTP/SIP/H323/PPTP/L2TP/IPSec). UPnP UPnP (Universal Plug and Play) supports zero-configuration networking, and can automatically discover a variety of networked devices. When UPnP is enabled, the connected device is allowed to access the network, obtain an IP address, and convey performance information.

  • Page 97: Table 60 Igmp

    Chapter 3: Web Interface IGMP Multicast has the ability to send the same data to multiple devices. IP hosts use IGMP (Internet Group Management Protocol) report multicast group memberships to the neighboring routers to transmit data, at the same time, the multicast router use IGMP to discover which hosts belong to the same multicast group.

  • Page 98: Storage

    Chapter 3: System planning Storage Storage Disk Management This page is used to manage the USB storage device. Table 61 Disk Management Field Name Description Adding files to the USB storage device Delete Remove the USB storage device file Remove Disk Transfer files within a USB storage device Format Format the USB storage device...

  • Page 99: Table 62 Ftp Setting

    Chapter 3: System planning Storage FTP Setting Table 62 FTP Setting Field Name Description FTP Server Enable/Disable FTP server FTP Server Name Set the FTP server name Anonymous Login If or not support anonymous login FTP Port Set FTP server port number Max.

  • Page 100: Table 63 Smb Setting

    Chapter 3: System planning Storage Smb Setting Table 63 Smb setting Field Name Description SAMBA Server Enable/Disable SAMBA server Workgroup Enter the working group NetBIOS Name Network basic input/output system name Add a shared file Edit Edit a shared file Delete a shared file Add a shared file Edit...

  • Page 101: Administration

    Chapter 3: System planning Storage Administration The user can manage the device in these webpages; you can configure the Time/Date, password, web access, system log and associated configuration TR069. Management Save config file Table 64 Save Config File Field Name Description Config file upload and Upload: click on browse, select file in the local, press the upload button to...

  • Page 102: Table 65 Administrator Settings

    Chapter 3: System planning Storage Administrator settings Table 65 Administrator settings Field Name Description User type Choose the user type from admin user and normal user and basic user New User Name You can modify the user name, set up a new user name New Password Input the new password Confirm Password...

  • Page 103: Table 66 Ntp Settings

    Chapter 3: System planning Storage Web Idle timeout Set the Web Idle timeout time. The webpage can be logged out after Web Idle Timeout without any operation. Allowed Remote IP(IP1,IP2,...) Set the IP from which a user can login the device remotely. Telnet Port Set the port value which is used to telnet to the device.

  • Page 104: Table 67 Daylight Saving Time

    Chapter 3: System planning Storage Secondary NTP Server Options for NTP server's IP address or domain name NTP synchronization NTP synchronization cycle, cycle time can be 1 to 1440 minutes in any one, the default setting is 60 minutes Daylight Saving Time Table 67 Daylight Saving Time Procedure Step 1.

  • Page 105: Table 68 System Log Setting

    Chapter 3: System planning Storage System Log Setting Table 68 System log Setting Field Name Description Syslog Enable Enable/Disable syslog function Syslog Level Select the system log, there is INFO and Debug two grades, the Debug INFO can provide more information Remote Syslog Enable Enable/Disable remote syslog function Remote Syslog server Add a remote server IP address.

  • Page 106: Firmware Upgrade

    Chapter 3: System planning Storage Factory Defaults Table 70 Factory Defaults Description Click Factory Default to restore the residential gateway to factory settings. Firmware Upgrade Table 71 Firmware upgrade Description 1. Choose upgrade file type from Image File and Dial Rule 2.

  • Page 107: Table 46 Scheduled Tasks

    Chapter 3: System planning Storage Scheduled Tasks Table 46 Scheduled Tasks Field Name Description Scheduled Reboot Scheduled Reboot Enable/Disable scheduled Reboot Scheduled Mode Select scheduled Mode Scheduled Mode Time Set the time to restart Scheduled PPPoE Scheduled PPPoE Enable/Disable scheduled PPPoE Scheduled Mode Select scheduled Mode Scheduled Mode...

  • Page 108: Provision

    Chapter 3: System planning Storage Provision Provisioning allows the router to auto-upgrade and auto-configure devices which support TFTP, HTTP and HTTPs .  Before testing or using TFTP, user should have tftp server and upgrading file and configuring file.  Before testing or using HTTP, user should have http server and upgrading file and configuring file.

  • Page 109: Table 73 Firmware Upgrade

    Chapter 3: System planning Storage Resync Random Delay(sec) Set the maximum delay for the request of synchronization file. The default is 40. Resync Periodic(sec) If the last resync was failure, The router will retry resync after the “Resync Error Retry Delay ” time, default is 3600s. Resync Error Retry Delay(rec) Set the periodic time for resync, default is 3600s.

  • Page 110: Snmp

    Chapter 3: System planning Storage SNMP Table 74 SNMP Field Name Description SNMP Service Enable or Disable the SNMP service Trap Server Address Enter the trap server address for sending SNMP traps Read Community Name String value that is used as a password to request information via SNMP from the device Write Community Name String value that is used as a password to write configuration values to the...

  • Page 111: Table 75 Tr069

    Chapter 3: System planning Storage TR-069 TR-069 provides the possibility of auto configuration of internet access devices and reduces the cost of management. TR-069 (short for Technical Report 069) is a DSL Forum technical specification entitled CPE WAN Management Protocol (CWMP). It defines an application layer protocol for remote management of end-user devices.
  • Page 112 Chapter 3: System planning Storage Periodic Inform Enable Enable the function of periodic inform or not. By default it is Enabled Periodic Inform Interval Periodic notification interval with the unit in seconds. The default value is 3600s Connect Request parameters User Name The username used to connect the TR069 server to the DUT Password...

  • Page 113: Diagnosis

    Chapter 3: System planning Storage Diagnosis In this page, user can do packet trace, ping test and traceroute test to diagnose the device’s connection status. Table 76 Diagnosis...
  • Page 114 Chapter 3: System planning Storage Description 1. Packet Trace Users can use the packet trace feature to intercept packets which traverse the device. Click the Start button to start home gateway tracking and keep refreshing the page until the message trace shows to stop, click the Save button to save captured packets.

  • Page 115: Operating Mode

    Chapter 3: System planning Storage Operating Mode Table 77 Operating mode Description Choose the Operation Mode as Basic Mode or Advanced Mode.

  • Page 116: System Log

    Chapter 3: System planning Storage System Log Table 78 System log Description If you enable the system log in Status/syslog webpage, you can view the system log in this webpage. Logout Table 79 Logout Description Press the logout button to logout, and then the login window will appear. Reboot Press the button to reboot the device.
  • Page 117 Chapter 4: IPv6 address configuration Chapter 4: IPv6 address configuration The router devices support IPv6 addressing.This chapter covers:  Introduction  IPv6 Advance  Configuring IPv6 Viewing WAN port status   IPv6 DHCP configuration for LAN/WLAN clients  LAN DHCPv6...

  • Page 118: Introduction

    Chapter 4: IPv6 address configuration Introduction DHCPv6 protocol is used to automatically provision/configure IPv6 capable end points in a local network. In addition to acquiring an IPv6 IP address for the WAN interface and its associated LAN/WLAN clients, the devices are also capable of prefix delegation. The Routers devices support the following types of modes of IPv6 addresses: ...

  • Page 119: Ipv6 Advance

    Chapter 4: IPv6 address configuration IPv6 Advance To enable IPv6 functionality: Navigate to Network > IPv6 Advanced page. Select Enable from the IPv6 Enable drop-down list. Click Save. Table 81 Enabling IPv6...

  • Page 120: Configuring Ipv6

    Chapter 4: IPv6 address configuration Configuring IPv6 Configuring Statefull IPv6 1. Navigate to Network > IPv6WAN page. The following window is displayed: Table 82 Configuring Statefull IPv6 Field Name Description Connection Type Select connection type DHCPv6 Address Settings Set it to statefull mode. Prefix Delegation Select Enable.

  • Page 121: Table 83 Configuring Stateless Ipv6

    Chapter 4: IPv6 address configuration Configuring Stateless IPv6 Table 83 Configuring Stateless IPv6 Field Name Description Connection Type Select connection type DHCPv6 Address Settings Set it to stateless mode Prefix Delegation Select Enable...

  • Page 122: Viewing Wan Port Status

    Chapter 4: IPv6 address configuration Viewing WAN port status To view the status of WAN port: Navigate to Status page. IPv6 DHCP configuration for LAN/WLAN clients Wired and wireless clients connected to the Routers can obtain their IPv6 addresses based on how the LAN s ide DHCPv6 parameters are configured.

  • Page 123: Lan Dhcpv6

    Chapter 4: IPv6 address configuration LAN DHCPv6 When IPv6 is enabled, the LAN/WLAN clients of Routers can be configured to receive IPv6 addresses from locally configured IPv6 pool or from an external DHCPv6 server. To enable LAN DHCPv6 service:...

  • Page 124: Chapter 5:Troubleshooting Guide

    Chapter 6: Troubleshooting Guide This chapter covers:  Configuring PC to get IP Address automatically  Cannot connect to the Web GUI  Forgotten Password...

  • Page 125: Configuring Pc To Get Ip Address Automatically

    Chapter 6:Troubleshooting Guide Configuring PC to get IP Address automatically Follow the below process to set your PC to get an IP address automatically: Step 1 : Click the “Start” button Step 2 : Select “control panel”, then double click “network connections” in the “control panel” Step 3 : Right click the “network connection”...

  • Page 126: Cannot Connect To The Web

    Chapter 6:Troubleshooting Guide Cannot connect to the Web Solution:  Check if the Ethernet cable is properly connected  Check if the URL is correct. The format of URL is: http:// the IP address  Check on any other browser apart from Internet explorer such Google ...

This manual is also suitable for:

G902

Table of Contents