Advertisement
Leg
1
Hint: You may want to lay the body on its side
to assemble the legs to the body.
• First, "snap" the bottom of the leg onto the
body
.
A
• Next, "snap" the tab on the bottom of the leg
into the body
.
B
• Then, insert and "snap" the peg on the top of
the leg into the socket in the body
Hint: The legs are designed to fit onto the
body one way. If a leg does not seem to fit, try
assembling it to the other side.
• Repeat this procedure to assemble the other
leg to the body.
Arm
2
• "Snap" each arm onto the upper body.
Hint: The arms are designed to fit onto the
body one way. If an arm does not seem to fit,
try assembling it to the other side of the body.
Assembly
C
B
A
• "Snap" the tail onto body.
Hint: The tail is designed to fit onto the body
one way. If it does not seem to fit, turn it
around and try again.
.
C
• The ladder is designed to break away
• At an angle, fit a peg on the ladder into a slot
3
3
Ladder
4
from the body. To reassemble, follow the
instructions below.
in the back of the body. Push to "snap" the
other side of the ladder in place.
Tail
Advertisement
