Advertisement
HOW TO ASSEMBLE
1. Open the package and take humidifier out of package.
2. Remove the foam and put main frame of humidifier on water container base.
3. Ensure that main frame is resting snuggly on the water container base. Holding a spring hook with the
locking bar facing out, attach one end of the spring hook to the main frame lip and the other end to the
lip socket located on the water container base. Stretch the locking bar of the spring hook to secure all
the elements together. Repeat for remaining spring hooks.
4. Connect water supply to the 3/8" water inlet valve on the humidifier, and check to ensure the float is
working normally.
5. Plug the humidifier into a 110V GFI dedicated wall receptacle or humidity sensor that is plugged into an
dedicated GFI 110V electrical outlet.
ATTENTION
1. DO NOT add any highly acid and strong alkaline chemical material in supplied water.
2. Never use water solution with mass sediment. Otherwise, the life of machine will be decreased.
3. Please clean the water outlet frequently.
4. Please operate this humidifier often. We recommend using the unit 2 times per day (3-5 minutes
each time). This will extend the service life of the unit.
DANGER
The humidifier should be used with a dedicated electrical circuit. Use with a 110V GFI wall receptacle.
3
Advertisement
