Wireless remote controller
OPERATION MODE display
Operation mode display indicates which op-
eration mode is in effect.
The vertical direction of air flow is indicated.
FAN SPEED display indicates which fan
speed has been selected.
The unit is turned ON and OFF alternately
each time the button is pressed.
FAN SPEED SELECT button
Used to change the fan speed.
MODE SELECT button
Used to switch the operation mode between
cooling, drying, blowing, heating and auto
w In case the outdoor unit is cool only type,
the heating mode is not available.
CHECK-TEST RUN button
Only press this button to perform an inspec-
tion check or test operation.
Do not use it for normal operation.
VANE CONTROL button
Used to change the air flow direction.
CHECK TEST RUN
CHECK&TEST RUN display indicates that
the unit is being checked or test-run.
Blinks when model is selected.
CHECK TEST RUN
Lights up while transmission to the indoor
unit is mode using switches.
SET TEMP. display indicates desired temper-
Displays the current time.
Displays when in timer operation or when
Displays the order of timer operation.
Displays whether timer is on or off.
SET TEMPERATURE button sets any desired
TIMER CONTROL buttons
AUTO STOP (OFF timer): when this switch
is set, the air conditioner will be au-
tomatically stopped at the preset time.
AUTO START (ON timer): when this switch
is set, the air conditioner will be automatical-
ly started at the preset time.
h and min buttons
Buttons used to set the "hour and minute" of
the current time and timer settings.
This switch the horizontal fan motion ON
(Not available for this model.)