Ganz Thermal ZNT6-H Quick Start Manual page 9

Fixed Camera Quick Start Guide
Solar Shroud and Stem Bumpers
Fully assembled Camera
Mounting the Fixed Mount Camera
The Fixed Mount camera can be mounted on a Tripod or Ganz Fixed
camera Bracket. For Tripod mount, use Fixed Mount Tripod Adapter offered
as an accessory.
Fixed Camera can be mounted on standard bracket (WB-1W)
DEVICE SENSITIVE TO ELECTROSTATIC DISCHARGE
The camera electronics and electronic interfaces are sensitive to
electrostatic discharge. Please follow appropriate ESD procedures when
handling the camera and during installation. For PoE installations, Ganz
strongly recommends the use of STP cabling and an earth grounded end
point to ensure proper ESD immunity. For AC or DC powered installations,
a properly earth grounded power source is strongly recommended
9
www.ganzsecurity.com
November 2014
WARNING