Acer ASPIRE M5802(G) Service Manual page 99

Step 9:Specify Volume Size then press "next".
Step 10:Press "next" to finish setup and start create RAID0.
Step 11:It may takes half and hours to create RAID0.After create completely,it will ask to reboot to finish create
RAID0.
2-2:Create a"RAID Ready" System into" RAID 1" with two Hard Drives by'Create RAID Volume from Existing
HDD Drive '.
Step 1:Install WIN7 OS with one SATA HDD.
Step 2:Shut down the system,then add another Serial ATA hard drive in the system.
Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console.
Step 4:Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID volume.
Step 5:Click "Next" at create a RAID volume window.
91
Picture8
Picture9
Chapter 7