Introduction - Look Solutions Cryo-Gate Operating Manual

The Cryo-Gate is a compact device that mates up to any professional fogger. It enab-
les the user to temporarily transform their existing fogger into a low fog generator.
The Cryo-Gate sits in front of the fogger's nozzle. A high-pressure dip-tube siphon
CO tank connects to the unit and allows the user to add a variable amount of CO
2
air to the fog's output. The result is a cold fog that stays low.
The connector to connect the delivered safety tube to the bottle has to be a
W 21.8 x 1 1/4" right male (CGA 320 connector). If a tank with this connector cannot
be found, you have to use an adaptor.
A tube (Ø 200 mm) can be connected to the front of the Cryo-Gate to guide the fog
into the requested direction.
The tube can be around ten meters long, allowing to place the machine away from
the stage to avoid disturbing noise.
Holes at the Cryo-Gate ease mounting it to a rack or building it into a flightcase.
Please note: Only use quick disappearing fog fluid to avoid the chance that the fog
will get warm and rises.
Also cooled down fog will rise after some time!
Please read the manual carefully before starting the device to ensure a correct
operation!

1. Introduction

4
and
2