6.1 Essentials to get started
To begin using your JetCam system, you must have the following:
A computer with the following:
Processor with an Intel 64-bit architecture, or equivalent.
An availably x4 (or x8 or x16) PCIe slot. Gen 3 support is recommended for faster
data transfer.
Vision Point Application installation
JetCam camera
Komodo Fiber board
Fiber QSFP+ Modules
Fiber optic cable
NOTE: KAYA Instruments doesn't guarantee compatibility with all computers that have the above
specifications. Please, consult KAYA representative for any specific issue
6.2 Installation instructions
The typical JetCam system is connected as described in Figure 2:
JetCam Camera
High Speed Camera User Guide
Power
supply
Figure 2 : JetCam Camera system connection diagram
6 Installation and Configurations
Fiber cable
(up to 10 km)
.
Komodo Fiber
Frame Grabber
15