Wireless Remote Controller - Mitsubishi Electric PLFY-P20VEM-E Technical & Service Manual

2-3. Wireless remote controller

Set Temperature buttons
Mode button (Changes operation mode)
Airflow button (Changes up/down airflow direction)
Timer ON button
Timer OFF button
Weekly timer ON/OFF button
Set Time button (Sets the time)
Operation mode
Cool Dry
Auto
Fan
(single set point)
2 Auto
Heat
(dual set point*)
* The initial setting is necessary.
Refer to Installation manual.
Temperature setting
The units of temperature can be changed. For
details, refer to the Installation Manual.
Vane setting
Step 1 Step 2 Step 3 Step 4 Step 5 Swing
OCH657
(not available)
Auto
Transmission area
Not available
Remote controller display
Battery replacement indicator
OFF/ON button
Fan Speed button (Changes fan speed)
i-see button
Menu button
SET/SEND button
CANCEL button
Up/Down buttons
Reset button
Not available
Appears when a non-supported func-
tion is selected.
Battery replacement indicator
Appears when the remaining battery
power is low.
Fan speed setting
3D i-see Sensor (Air distribution)
Default
10
When Direct or Indirect
Direct Indirect
is selected, the vane
setting is set to "Auto".