Advertisement
Quick Links
Advertisement
Summary of Contents for Kiyo GPS M1
- Page 1 KIYO GPS M1 USER’S GUIDE...
-
Page 3: Operation Of The Device
1. PURPOSE OF THE GPS DETECTOR DEVICE The purpose of the device is to ensure the safe driving conditions, by warning the motorcyclist to fixed speed cameras, Section Controls, Red Light Cameras and other risks. To do so, the detector uses a free and updatable GPS database. 2. -
Page 4: Installation
3. INSTALLATION a) Accessories Central Unit LED wiring harness GPS receiver User’s Guide b) Finding the location of the Central Unit The Central Unit must be installed to a place where the it is safe from water; the area of the battery beneath the seat is usually a suitable location. To avoid any water damage, it is recommended to place the device into a waterproof packet, which will protect it from splashing water and dust. - Page 5 Lead the LED wiring all the way to the central unit and fasten it in a way that it would not move or loose. Make sure that the wiring does not restrict the movement of the steering, your arms or any part of the motorcycle. Connect the wiring to the central unit of the device.
- Page 6 Controls of the GPS M1 USB socket Power socket Power cable...
- Page 7 Wiring diagram of the GPS M1 device Red cable (+12V upon igniton) Black cable (negative) LED strip Status indicator USB dust cap...
- Page 8 4. USE OF THE GPS DETECTOR a) Turning the detector on After igniting the engine, the device powers on and starts connecting to the GPS satellites. This searching is indicated by a flashing LED light. After successfully con- necting to the satellites, the flashing light ceases and the continuous LED light indicates that the device is ready for use.
- Page 9 c) Signals of the LED status indicator Continuous green signal: The device is connected to the GPS satellites and it is ready for use. Flashing green signal: The device is connecting to the GPS satellites and it is NOT ready for use. No signal: In this case, the device is not powered.
- Page 10 For this, all you have to do is registering your KIYO device. You can register the device on the following website: kiyotechnology.hu/regisztracio...