Table of Contents
Advertisement
Turning the TV on or off
IMPORTANT: At first, you have to match the remote
control with TV.
To turn your TV on or off (standby mode):
1. Plug the power cord into an AC power outlet.
2. Press [POWER] button, your TV turns on.
3. Press [POWER] button again to turn off your TV. When
you turn off your TV, it goes into standby mode.
WARNING
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the power
cord.
Changing Channels / Volume
1. Press the [CH
/ V ] button on the TV/remote control to
change the channel.
2. Press the [VOL + / - ] button on the TV/remote control to
adjust the volume.
3. Press the numeric buttons on the remote control to
display the corresponding channels.
NOTE
Changing the channels can also be achieved by directly
entering the channel number using the numeric keys on
the remote control. If you are entering a two or three digit
channel number, the time between key presses should be
less than 3 seconds.
Turning the TV On for the First Time
The Setup Wizard menu appears the first time you turn
on the TV. It will assist you to specify the menu language,
Picture Mode, Tuner Mode and Channel Installation.
IMPORTANT: Make sure that the antenna or cable is
connected and a wired or wireless Internet connection is
available.
1. Make sure that you have:
Installed the remote control batteries.
Connected an antenna or cable.
Connected the power cord.
Matched the remote control with TV.
2. Press [POWER
] button to turn on your TV.
3. The Setup Wizard menu displays. Follow Step 1 through
10 in the Setup Wizard menu procedure.
Basic Features
Setup Wizard
Follow the on-screen instructions to customize your TV
settings according to your preferences.
Step 1
Pairing remote
Step 2
Step 3
Step 4
Step 5
Connect to the
Step 6
Google Account
Step 7
Google TV better
Step 8
Enter ZIP code
Step 9
Set up TV service
Step 10
Receiver control
16
Pairing the remote control
controller
Select menu
Selecting menu language.
language
Hisense legal information
Legal notice
Select usage
Selecting Home or Store.
patterns
Connecting to the Internet to
Ethernet cable or wireless.
Internet
Signing in with your Google
Account
Check the box to send the
Help make
usage statistics and crash
reports to Google automatically.
Enter ZIP code so that you
receive accurate programming
information.
Select the video input you use
to connect your TV service to
your TV.
Select your Audio amplifier
Set up Audio
manufacturer. To control your
receiver, connect the IR blaster.
The initial settings are
That's it!
completed.
Hide quick links:
Advertisement
Table of Contents
