Table of Contents
Advertisement
Available languages
Available languages
VERTICAL MOUNTING INSTRUCTIONS
Make sure the French Fry Cutter is mounted to a
solid surface. DO NOT mount to drywall that has
no structural support behind it. The French Fry
Cutter needs to be mounted to the studs of the
wall or any other solid surface.
When mounting the French Fry Cutter, position it
at a distance from the floor that is a comfortable
height and will provide the best leverage for
cutting a potato.
Mount the French Fry Cutter through the
mounting holes on the 4 feet using appropriate
sized bolts (not included) (FIGURE 3).
HORIZONTAL MOUNTING INSTRUCTIONS
To mount your French Fry Cutter on a table top or stand,
simply lay the French Fry Cutter down onto the legs and
secure to the work surface using the appropriately sized
screws (not included).
NOTE: Even though Horizontal Mounting is an option, it is recommended to mount
the French Fry Cutter vertically on a structurally supported wall. More leverage
can be applied when mounted vertically than can be applied mounted horizontally.
HORIZONTAL SUCTION CUP MOUNTING INSTRUCTIONS
To install the Suction Cup Feet to your French Fry Cutter,
place the Bolt of each Suction Cup through the holes in
the Feet of the French Fry Cutter. Thread the Nylock Nut
onto each Bolt tightly (FIGURE 4). Press firmly down on
the French Fry Cutter to create suction between the work
surface and the French Fry Cutter. Suction Cups work
best on smooth, clean horizontal surfaces. To create
more of a suction, a damp cloth can be swiped across the
Suction Cup prior to adhering. Be certain to check the
stability of the French Fry Cutter to the work surface, prior
to using.
NOTE: The Suction Cups are not meant to be used on
a vertical surface. Use the Suction Cups for horizontal
mounting purposes only.
Suction Cup
Feet (Sold
Separately)
Mounting
FIGURE 3
Hole
on the
Foot
Mounting
Hole
on the
Foot
FIGURE 4
Nylock Nut
Suction Cup
Bolt
7
Advertisement
Table of Contents
