Panasonic KX-FM106 Operating Instructions Manual page 9

2 Pull the tension bar forward and hold open while
inserting the paper.
≥The height of the stack of the paper should not
exceed the upper limit on the paper tray, otherwise
the paper may jam or multi-feed.
≥The paper should not be over the tab.
≥If the paper is not inserted correctly, readjust the
paper or the paper may jam.
Correct
Note:
≥Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper
used for resumes.
≥Do not use different types or thicknesses of paper in the paper tray at the same time. This may cause
a paper jam.
≥Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated,
damaged or wrinkled.
≥Avoid double-sided printing.
≥Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper
may jam.
≥Do not reinsert the ejected paper into the recording paper exit.
≥Some paper only accepts print on one side. Try using the other side of paper when you are not happy with
the print quality.
Adding paper to the paper tray
1. Pull the tension bar forward and hold open while
removing all of the installed paper.
2. Add paper to the removed paper and straighten.
3. Fan the stack of paper.
4. Pull the tension bar forward and hold open while
inserting the paper.
8
Incorrect
Stack of
paper
Paper tray
Tension bar
Upper
limit
Tab
Tension bar