Overview!
Document entrance
Recording paper exit
Note:
≥The document and recording paper will be ejected from the front of the unit. Install the unit on a desk or floor
with a smooth surface and do not place anything in front of the unit.
Before
installation!
1
Remove the shipping tape.
2
Open the cover by pressing the cover open button.
Lift the film cartridge, remove the leaflet and replace
3
the film cartridge.
4
Close the cover securely by pushing down on the
dotted area at both ends.
Document guides
Cover
Document exit
Recording paper
entrance
Paper tray
Document feeder tray
Cover open button
Speaker
Serial interface connector
(Used to connect your PC
with a RS232C cable.)
Film
cartridge
Dotted area
Shipping tape
Cover open
button
Leaflet
5