How Do You Install Your Oven; Electrical Connection - Blomberg BDE1200X Using Your Oven

99635821_ML_B.qxd 08/03/2005
H
ow do you install your oven?
Electrical
connection
Operating voltage ......................................................... 220-240 V ~ 50 Hz
Total oven power .......................................................................... 1.77 kW
Energy consumption
- heating up to and holding at 100°C for one hour ......................... 0.71 kWh
Internal dimensions of your oven
Width .......................................................................................... 38.5 cm
Height ......................................................................................... 18.2 cm
Depth .......................................................................................... 33.5 cm
Net capacity ............................................................................. 23.5 litres
14:11 Page 19
For permanent installation, be mindful to add a
standardised, compliant cut-off device in the elec-
trical conduit. Otherwise the appliance must be
positioned so that the electrical outlet is accessible
after the unit has been built-in.
You must use an electrical receptacle that contains
a ground wire and is connected in compliance with
applicable safety standards.
Your electrical installation must be equipped with
10-ampere thermal-sensitive protection.
Do not operate the oven if the power cable or its
plug are damaged. In this case, they must be
replaced by the manufacturer, its After Sales
Service department of a person of similar qualifi-
cations so as to avoid any danger.
GB
19