Safety Warnings 1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS Read All Instructions Before Using This Appliance Read and understand this owner's manual and all labels on the Wet/Dry Vacuum before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this Wet/Dry Vacuum only as described in this manual.
Page 4
Use this Wet/Dry Vacuum as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vacuum. DOUBLE INSULATED GROUNDING NOT REQUIRED WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS. WARNING: to reduce the risk of electric shock, do not expose to rain. Store indoors. WARNING: For your own safety, read and understand owner’s manual.
General Assembly Instructions GENERAL ASSEMBLY Verify that the power cord is disconnected from the outlet (Fig. 1). Undo the clasps (Fig. 2). Lift the top section off the container (Fig. 3). Remove the contents from inside the container (Fig. 4). Turn the container upside down, and insert the four castors.
Dry-Vacuum Operation DRY VACUUMING BEFORE YOU START WARNING! Be sure to read, understand, and apply Section 1, entitled ‘Safety Warnings'. Reminder: DO NOT vacuum hazardous substances. The use of an incorrect dust bag will void the warranty. 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2.
Wet-Vacuum Operation WET VACUUMING BEFORE YOU START WARNING! Be sure to read, understand, and apply Section 1, entitled ‘Safety Warnings'. Reminder: DO NOT vacuum hazardous substances. 1. Verify that the power cord is disconnected from the outlet. Verify that the container is clean and free of dust and dirt (Fig.
Blowing Operation 1. Push the large end of the flexible hose into the blower connection in the top of the motor housing (Fig. 1). 2. Ensure the power switch is turned off and plug into the power supply (Fig. 2). 3.
Reuse it when it is dry. It is recommended to use a new dust filter. Accessories Available accessories for your Jobmate® Wet/Dry Vacuum: 7’ (2.13 m) Hose Set (54-0204) Nozzle Brush (54-0084) Multi Surface Floor Nozzle (54-0087)
Parts List Item Description Number Switch Assembly Top Cover Lower Cover Assembly Seal Ring Anti-Noise Foam Motor Assembly Tray Assembly Tank Castor Filter Basket Safety Float Vale Screw Cap Aluminium Press Board Impeller Press Board Power Cord Assembly Internal Wiring Cord Clamp Assembly Handle Assembly Extension Wands...
Warranty JOBMATE® LIMITED WARRANTY This JOBMATE® product is guaranteed for a period of 1 year from the date of original retail purchase against defects in materials and workmanship Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced (with the same model, or one of equal value or specification), at our option.
Need help?
Do you have a question about the 54-0011-6 and is the answer not in the manual?
Questions and answers