Table of Contents
Advertisement
Operating the appliance
en
Change the programme
default settings
You can use the displayed programme
presettings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed. They are not
saved when the appliance is switched
off.
Programme default settings
~ Page 13
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active. The settings are
not saved when the appliance is
switched off.
Additional programme settings
~ Page 14
Placing laundry into the drum
:
Warning
Risk to life!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
16
Notes
Mix items of washing of varying
■
sizes. Laundry items of different
sizes distribute themselves better
during the spin cycle. Individual
laundry items may cause an
unbalanced load.
Observe the maximum indicated
■
load. Overfilling adversely affects the
washing result and encourages
creasing.
Unfold presorted laundry items and
1.
place them in the washing drum.
Ensure that no items of laundry are
2.
trapped between the door and
rubber seal.
Close the door.
3.
The indicator light on the Start button
flashes, and the default settings for the
programme appear continuously on the
display panel. Changes may be made
to the default settings.
Advertisement
Table of Contents
