Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 120814
for recycling.
Help to protect the
20
680Kg Motorcycle Jack
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
03634
Advertisement
Related Manuals for SIP 03634
Summary of Contents for SIP 03634
- Page 1 Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate recycling bin. FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: 03634 TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com Please read and fully understand the instructions in this manual www.sip-group.com...
- Page 2 680Kg Motorcycle Jack - SIP Part No. 03634 Conforms to the requirements of the following directive/s, as indicated. 2006/42/EC Machinery Directive And The Relevant Harmonised Standard/s, including EN 1494:2000+A1 Signed: …………………………………... Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd Date: 28/06/2014.
- Page 3 PARTS LIST CONTENTS Ref. No. Description SIP Part No. Ref. No. Description SIP Part No. Front wheel HY01-00165 Thumb screw HY01-00178 Base HY01-00166 Spring HY01-00179 Page No. Description Saddle unit HY01-00167 Washer HY01-00180 Safety Symbols Used Throughout This Manual Lifting arm (left)
- Page 4 SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL EXPLODED DRAWING Danger / Caution: Indicates risk of personal injury and/or the possibility of damage. Note: Supplementary information. SAFETY INSTRUCTIONS IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the motor- cycle jack.
- Page 5 TROUBLESHOOTING SAFETY INSTRUCTIONS….cont DANGER! Check that the motorcycle jack is in sound condition and good working or- der before each use; Take immediate action to repair or replace damaged parts. WARNING! Only operate on a level and stable surface and never use on soft ground Symptom Possible Causes Corrective Action...
- Page 6 SAFETY INSTRUCTIONS….cont MAINTENANCE….cont erty damage. Lower the lifting saddle to its lowest position. ALWAYS use the ratchet straps to secure the vehicle to the jack. Place the jack on its side and with a cross headed screwdriver, unscrew the oil NEVER move the jack if the vehicle is not secured with the ratchet straps.
- Page 7 OPERATING INSTRUCTIONS….cont GUARANTEE This SIP motorcycle jack is covered by a 12 month parts and labour warranty covering Caution: Take care when lowering the jack that nothing can get trapped failure due to manufacturers defects. This does not cover failure due to misuse or op- in the moving parts of the jack, or under the vehicle.
- Page 8 TECHNICAL SPECIFICATIONS OPERATING INSTRUCTIONS….cont LIFTING THE JACK Part No. Maximum Load Capacity 03634 680 Kg Note: Follow the vehicle manufacturer’s recommended guidelines for lift- ing. Always refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the vehicle.
- Page 9 OPERATING INSTRUCTIONS….cont GETTING TO KNOW YOUR MOTORCYCLE JACK Note: Do not use pliers or similar to operate the ratchet lever, this could possibly damage the ratchet mechanism and void any warranty you may have. Supplied with the motorcycle jack are two ratchet straps (1” wide x 15ft long), to use the ratchet straps follow the steps below Securing a vehicle with the ratchet straps: Place the ratchet lever in the closed position (Fig.6)
- Page 10 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS….cont Fig.1 Fig.5 Attach the handle to the connecting frame using Place the hydraulic ram between the slot on the handle pin (Fig.5). the connecting frame and use the thumb Make sure all bolts are tight before use. screw to secure in place (Fig.1).
Need help?
Do you have a question about the 03634 and is the answer not in the manual?
Questions and answers