Related Manuals for Konan Labs KLT-3/150RG-D
Summary of Contents for Konan Labs KLT-3/150RG-D
- Page 1 MULTI EFFECTS LED TWINKLING LASER SHOW SYSTEM User's Manual Read this manual before using. Do not attempt to open the housing or repair this device by yourself without contact us!
- Page 2 DMX Address Chart This chart lists the DMX dipswitch setting for DMX address 1 through 511. Follow the instructions below to configure fixture dipswitches with you desired DMX address. DMX Address Quick Reference Chart DipSwitch Position DipSwitch Position DMX Address Page 9...
-
Page 3: Troubleshooting
General instructions Notes: 1. DMX console can not be used in Master-Slave operation (Sound Active or AUTO mode ). Unpacking: 2. There should be only one master unit in Master-Slave operation. Thank you for purchasing this product. Please read user guide for safety and operations inf- Troubleshooting ormation before using the product. -
Page 4: Technical Specification
Technical Specification Master-Slave Operation This mode will allow you to link up to 32 units together without controller. 1. Voltage: AC110V-130V/200V-250V, 50HZ-60HZ/ Fuse: 2A/250V 1. Install the units in a suitable position (laying or appending). 2. Rated Power: 20W 2. Choose a unit to function as Master mode, set dipswitch to select Sound Active or AUTO 3. -
Page 5: Front/Rear Panel
Front/Rear Panel Dipswitch #10 is use to set master or slave mode. Master modes have sound active and AUTO mode. Slave modes have DMX and Slave mode. The units automatically identify DMX or SLAVE mode by data receives. Dipswitch #9 use to is set sound active or AUTO mode in master mode. -
Page 6: Dmx Control
DMX Control Channel Function Value Description LED OFF The system only accepts the DMX512 signal of international standard to control the system 1～55 mode, the laser beam ON /OFF, running direction, running speed and twinkle speed etc. R-G-B-RG-RB-GB-RGB 56～99 R-G-B AUTO change 100～159 RG-RB-GB-RGB AUTO change DMX Control Parameter Chart...