ProForm T10.0 PFTL05051 User Manual page 9

Proform user's manual treadmill
Table of Contents

Advertisement

3. The headband must be worn with the sensor win-
dow centered on your forehead (see HOW TO PUT
ON THE PULSE SENSOR on page 8). The small
button next to the sensor window must be de-
pressed. Make sure that there is no hair in front of
the pulse sensor or between the sensor window and
your forehead. Make-up applied to the forehead
may also interfere with pulse readings.
Note: If the pulse sensor does not detect your pulse
when the sensor window is centered on your fore-
head, try positioning the sensor window above your
right or left eyebrow. Depending on the shape of
your forehead, your pulse may be detected more
easily from a slightly different position.
4. Avoid turning your head more than 30° away from
the console, or the console may not pick up the sig-
nal from the pulse sensor.
5. The sensor window should be cleaned weekly when
the treadmill is used regularly. Moisten a cotton swab
with water, and carefully wipe the sensor window.
6. Because your pulse constantly changes, the pulse
sensor will sample and average your pulse every
few seconds. When you first put on the pulse sen-
sor, it may take up to ten seconds before an accu-
rate pulse is shown.
7. If the pulse sensor does not function properly, check
the batteries (see HOW TO INSTALL BATTERIES
on page 8).
HOW TO SOLVE COMMON PULSE PROBLEMS
1. If you are wearing the pulse sensor and the
NO PULSE DETECTED indicator lights:
See guidelines 2, 3, 4, 5, 6, and 7 on page 8
and this page.
2. If the pulse shown in the PULSE display
seems excessively high or low:
See guideline 6 on this page.
3. If the error code "E5" appears in the PULSE
display:
See guidelines 2, 3, 4, 5, 6, and 7 on page 8
and this page.
4. If the letters "PLS" appear in the PULSE
display:
See guidelines 2, 3, 4, 5, 6, and 7 on page 8
and this page.
HOW TO CLEAN THE PULSE SENSOR AND
HEADBAND
To clean the pulse sensor, first remove the headband.
Wipe the pulse sensor clean with a damp cloth. Never
immerse the pulse sensor in water.
To clean the headband, hand wash it in mild detergent,
gently wring it out, and allow it to air dry.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T10.0Pftl05051

Table of Contents