Replacing The Fuse - Radio Shack 22-1699 Owner's Manual

360 laser/radar detector

Hide thumbs Also See for 22-1699:

Table of Contents

REPLACING THE FUSE

If the detector stops operating, follow these steps to check

the fuse in the power cord's cigarette lighter plug and

replace it with a 2 amp, 1 1/4 X 1/4, fast-acting fuse

(Cat.No. 270-1007), if necessary.

Caution: Using a fuse that does not meet these require-

ment listed above can damage your detector, the power

cable, or the vehicle's electrical system.

1. Carefully turn the knurled ring on the cigarette lighter

plug counterclockwise to unscrew it.

Caution: If you must use pliers to loosen the ring, be

careful not to crush the ring or the metal tip inside the ring.

2. Carefully remove the ring and tip from the cigarette

lighter plug, then remove the old fuse.

Note: Take care not to lose the ring or tip, or the spring

inside the plug.

3. Check the fuse. If it has blown, replace it.

Table of Contents