Introduction This document describes the IoT Gateway (Model DN3E6JE074) overview and how to use the Z-Wave functionality. Feature Overview The IoT Gateway is a Gateway for IoT with functions of LTE, Wireless LAN, Z-Wave and BLE communication. It can collect sensing data from various Z-Wave and BLE sensor devices, and upload it to cloud server by LTE function anywhere LTE communication is available.
Product Drawings Front side Back side Installation The installation of the IoT Gateway is only one step process: 1- Connect AC Adapter to the Gateway and plug it into AC outlet. The Gateway has no Power Switch. It will power up as soon as plugged in the AC Adapter.
Z-Wave Overview General Information Device Type Gateway Role Type Central Static Controller (CSC) Command Class Support COMMAND_CLASS_APPLICATION_STATUS COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_ASSOCIATION_GRP_INFO COMMAND_CLASS_CRC_16_ENCAP COMMAND_CLASS_DEVICE_RESET_LOCALLY COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_SECURITY COMMAND_CLASS_VERSION_V2 COMMAND_CLASS_ZWAVEPLUS_INFO_V2 Control COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_BASIC COMMAND_CLASS_CRC_16_ENCAP COMMAND_CLASS_MULTI_CHANNEL _V4 COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3 COMMAND_CLASS_WAKE_UP_V2 COMMAND_CLASS_BATTERY COMMAND_CLASS_CONFIGURATION COMMAND_CLASS_DOOR_LOCK_V2 COMMAND_CLASS_INDICATOR COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_METER_V3 COMMAND_CLASS_NODE_NAMING COMMAND_CLASS_NOTIFICATION_V8 COMMAND_CLASS_SENSOR_MULTILEVEL_V11...
Interoperability Any products from different manufacturers and product categories can be a part of the same Z-Wave network with the IoT Gateway, and that the different non-battery powered nodes can act as repeaters regardless of manufacturers. Security Enabled Z-Wave Plus Product The IoT Gateway is a Security Enabled Z-Wave Plus Product.
Android Controller Application “SH-Gateway-Controller” Gateway select screen The icon of the gateway that you can use is displayed. If nothing is displayed, please confirm that the network is correctly set.
Device Viewer When you select a gateway, the available devices are displayed. If there is no available device, nothing is displayed. In the case of a device that supports temperature, humidity or illuminance, the report value is displayed. Represents the state of Home security. Represents the current Event according to Notification from the device.
Device End point button Device button means one device means End point Lock status lock unlock Multilevel sensor means humidity means temperature means illuminance Home security Glass Breakage Motion Detection Undetected Detected Undetected Detected Intrusion Tampering Undetected Detected Undetected Detected Unknown Undetected Detected...
Battery Battery level is displayed 100% Battery level is displayed as numerical value. It is displayed when the battery level is low. It is displayed when the battery level is not acquired. Report button When the report has been updated, It is displayed with a red icon.
Inclusion and Exclusion (Add and Remove) Inclusion (Adding devices) To add a device to the Z-Wave network, press “Inclusion” button in Android Controller Application or press the Z-Wave button of IoT Gateway the IoT Gateway once. This will put into Inclusion mode and Z-Wave LED blinks slowly.
Lock/Unlock Operation When you tap the lock status icon, Lock / Unlock Operation dialog is displayed. Send an instruction to lock to Gateway. Send an instruction to unlock to Gateway. Update the lock status.
Send Command When you tap the Device button, “Send Command” dialog is displayed. For the tapped device, select the command class and enter necessary information to be transmitted. Send the command currently entered. Cancel (The dialog disappears).
Settings When you tap the Setting button, Settings dialog is displayed. Select the item you want to set. When you tap an item, dialog is displayed. ・Learn Mode Classic Set the Gateway to Learn Mode(Classic) ・Learn Mode NWI Set the Gateway to Learn Mode(NWI) ・Node Remove Remove the device with the selected Node ID ・Node Replace...
Learn Mode To add the IoT Gateway into another Z-Wave network as a secondary controller or inclusion controller, press “Learn Mode Classic” or “Learn Mode NWI” in Settings dialog. Gateway Operation dialog appears and keeps being displayed during Learn Mode. If you want to abort Learn Mode, press “ABORT”.
Node Replace To replace a failing Node to another equivalent device, press “Replace” in Settings dialog, and tap the Node ID you want to replace in Node Replace dialog. Gateway Operation dialog will appear. Reset (Factory Default Reset) Press “RESET” in Factory Default Reset dialog. This will reset the Z- Wave chip and all LEDs blinks, and the IoT Gateway will broadcast the “DEVICE RESET LOCALLY NOTIFICATION”...
Replication (Copy) In case that the IoT Gateway is already the controller of the Z-Wave network, put the IoT Gateway into Inclusion mode, and put another controller into Learn mode. The Replication will be started and network information will be sent to another controller.