Sharp DN3E6JE074 User Manual page 10

Inclusion and Exclusion (Add and Remove)
Inclusion (Adding devices)
To add a device to the Z-Wave network, press "Inclusion" button in
Android Controller Application or press the Z-Wave button of
IoT Gateway
once. This will put
mode and Z-Wave LED blinks slowly. Gateway operation dialog
appears in Android Controller Application. Gateway operation dialog
keeps being displayed during Inclusion mode.
If you want to stop Inclusion, press "Abort" button in Gateway
operation dialog, or wait for one minute and Inclusion mode will
automatically stop. When Inclusion mode is stopped, Gateway
operation dialog will automatically disappear.
Exclusion (Removing devices)
To remove a device from the Z-Wave network, press "Exclusion"
button in Android Controller Application or hold down the Z-Wave
button of the IoT Gateway (over 3 seconds). This will put the IoT
Gateway into Exclusion mode and Z-Wave LED blinks quickly. Gateway
operation dialog appears in Android Controller Application. Gateway
operation dialog keeps being displayed during Exclusion mode.
If you want to abort Exclusion, press "Abort" button in Gateway
operation dialog, or wait for one minute and Exclusion mode will
automatically stop. When Exclusion mode is stopped, Gateway
operation dialog will automatically disappear.
the IoT Gateway
into Inclusion
the