Page 1
TUS3400 Panel PC IEI Technology Corp. MODEL: TUS3400 User Manual Page 1 Rev. 1.01 – 15 March, 2017...
Page 2
TUS3400 Revision Date Version Changes 17 September, 2013 1.00 Initial release 11 November, 2016 1.01 USB port update Page 2...
Page 3
TUS3400 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4
TUS3400 Table of Contents 1. INTRODUCTION ………………………………………………………………...5 1.1 OVERVIEW……………………………………………………………………….6 1.2 DIMENSIONS…………………………………….……………………………….7 1.3 SPECIFICATIONS………………………………….…………………………….9 2 UNPACKING ………………………………………………………………………11 2.1 UNPACKING…………………………………………………………………….12 2.2 PACKING LIST………………………………………………………………….13 3 INSTALLATION …………………………………………………………………14 3.1 ANTI-STATIC PRECAUTIONS…………….………………………………….15 3.2 INSTALLATION PRECAUTIONS…………………………………………….15 3.3 PREINSTALLED COMPONENTS…………………………………………….16 3.4 REMOVING THE BACK COVER……………………………………………..17 3.5 REMOVING THE CONSOLE………………………………………………….18 4 SYSTEM MAINTENANCE ……………………………………………………19...
1.1 Overview Figure 1-1: TUS3400 Portable Computer The TUS3400 portable computer provides all the features of a PC. The TUS3400 provides wireless networking for integration into company/facility networks. The major external device connections include USB 3.0/2.0 and serial port connectors.
TUS3400 1.3 Specifications The technical specifications for the TUS3400 system are listed in below table. Model Name TUS3400 SBC Model TRN-HM65-MB 2nd Generation Intel® Core™i7-3555LE processor Chipset Intel HM65 2 x 4G DDR3 1333 SO-DIMM (Support ECC) LCD Size 15"...
Page 10
TUS3400 Construction PC+ABS Material Dimension (WxHxD) 388.3*395.6*88.45 (mm) Physical Weight 6.8kg a. Magnet size:30mm x 8mm x 6mm. Magnetic Latch b. Q'ty : 8pcs (B part*4, C part *4) c. Open/Close Force : 2.0kgf ~ 2.5kgf. Operation 0~35° C Temperature...
TUS3400 2.1 Unpacking To unpack the Portable Computer, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the panel PC has been properly installed. This ensures the screen is protected during the installation process.
TUS3400 2.2 Packing List The TUS3400 is shipped with the following components: Quantity Item Remark TUS3400 Power Adapter (P/N: TRN-63040-010120-020-RS) Packing List If any of the above items are missing or damaged, contact the distributor or sales representative immediately. Page 13...
During the time the board is handled, frequently touch any conducting materials that are connected to the ground. Use an anti-static pad: - When configuring the TUS3400, place it on an antic-static pad. This reduces the possibility of ESD damaging the TUS3400.
TUS3400 Anti-static Discharge: If a user open the portable computer to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Preinstalled Components The following components are all preinstalled. Motherboard DDR3 memory module...
Before removing the back cover, make sure all power to the system has been disconnected. Failing to do so may cause severe damage to the TUS3400 and injury to the user. To access the HDD and install ECG, ultrasound module, the back cover must be removed.
Before removing the console, make sure all power to the system has been disconnected. Failing to do so may cause severe damage to the TUS3400 and injury to the user. WARNING! Please take antistatic precautions when working with the internal components.
Page 22
TUS3400 Step 4: Grasp the SO-DIMM module by the edges and carefully pull it out of the socket. Step 5: Install the new SO-DIMM module by pushing it into the socket at an angle (Figure 4-1). Step 6: Gently push the rear of the SO-DIMM module down (Figure 4-1). The spring retainer clips clip into place and secure the SO-DIMM module in the socket.
TUS3400 WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the system. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TUS3400. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the TUS3400 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging any electrical component.
When maintaining or cleaning the TUS3400, please follow the guidelines below. A.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the TUS3400, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any...
In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the TUS3400. Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the TUS3400.
Page 28
TUS3400 device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
TUS3400 B.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 31
TUS3400 Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery...