5. DIAGNOSTIC
5-1. Summary
5-2. Files
5-3. Hardware
5-4. Procedure
1. To connect In-line, KP and UPS under power off mode.
2. Load C_SETUP.EXE and press Enter.
3. Load C_NETDRV.COM and press Enter.
4. Load C_DIAG.EXE and press Enter.
1. In-line ( 1 to 1
2. In-line ( 1 to Multiple
3. Rom Check
4. Ram Write/Read
5. KP testing Print
6. The status for UPS
7. UPS DC cutting
1. C_SETUP.EXE
2. C_NETDRV.COM
3. C_DIAG.EXE
1. I/O-PB-12
2. PC(IBM-AT) and Display
3. ECR
Model: CE-4700,TK-1300,TK-2300,TK-2700,TK-5100
4. KP
Model: KP-200, KP-300
5. In-line cable
6. KP Cable
Note: Ensure that ID=1, speed= 4,800bps for KP.
— 12 —
: Connection type)
: Connection-Less type )