2. Function and performance characteristics
The gesis KNX P CO presence detector detects persons present as a re-
sult of the slightest movements. At the same time its light sensor measures
the brightness level in the room and compares it with the preset brightness
value.
●
Control of one or two lighting groups
●
Switching mode or constant light control
●
Mixed light measurement
●
Semi or fully automatic operation
●
Presence output with switch-on/off delay time
●
Surveillance mode with manipulation protection
●
Brightness value output in Lux
●
Parallel circuit operation of several detectors (Master-Slave, Master-Ma-
ster) without logic component
●
Suitable for fluorescent/compact energy saving lamps, as well as for
halogen/incandescent lamps
●
Mechanical safety locking
●
Service remote control (optional)
●
User remote control (optional)
22