Zanussi ZBM26642 User Manual page 23

Installation
The microwave can be fitted in position A or B:
Position
A
B
Measurements in (mm)
Installing the appliance
1. Remove all packaging and check
carefully for any signs of damage.
2. Fit the fixing hooks to the kitchen
cupboard using the instruction sheet and
template supplied.
3. Fit the appliance into the kitchen
cupboard slowly, and without force. The
appliance should be lifted onto the fixing
hooks and then lowered into place. In the
case of interference during fitting, this
hook is reversible. The front frame of the
oven should seal against the front
opening of the cupboard.
4. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
4 mm
www.zanussi.com
Niche size
W D H
562 x 550 x 450
562 x 500 x 450
4 mm
4 mm
23