TP-Link T3700G-52TQ Installation Manual
Jetstream stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- User manual (426 pages) ,
- Installation manual (28 pages)
Related Manuals for TP-Link T3700G-52TQ
Summary of Contents for TP-Link T3700G-52TQ
-
Page 1: Installation Guide
Business Networking Solution Installation Guide JetStream Stackable L3 Managed Switch T3700G-52TQ... - Page 3 Remind to take notice. The note contains the helpful information for a better use of the product. Related Document The User Guide and CLI Reference Guide of the product are provided on the resource CD. To obtain the latest product information, please visit the official website: http://www.tp-link.com About this Installation Guide...
- Page 4 JetStream Stackable L3 Managed Switch Contents Chapter 1 Introduction —————————————————— 01 Product Overview .................01 Appearance ..................01 Chapter 2 Preparing For Installation ———————————— 05 Package Contents ...............05 Safety Precautions ..............05 Installation Tools ................07 Installation & Connection Flow ..........07 Chapter 3 Installation ——————————————————— 09 Installing the Switch on a Desktop ........09 Installing the Switch Into a 19-inch Rack ......09 Installing &...
-
Page 5: Chapter 1 Introduction
T3700G-52TQ is ideal for large businesses, campuses or SMB networks requiring an outstanding, reliable and affordable 10 Gigabit solution. T3700G-52TQ supports stacking of up to 8 units, thus providing flexible scalability and protective redundancy for your networks. Moreover, aiming to better protect your network, T3700G-52TQ supports 2 power supply modules. - Page 6 JetStream Stackable L3 Managed Switch Status Indication A 1000Mbps device is connected to the corresponding port, but no activity. Green Flashing Data is being transmitted or received. MGMT A 10/100Mbps device is connected to the corresponding port, but no activity. Yellow Flashing Data is being transmitted or received.
- Page 7 Port 49-50, designed to install the 10Gbps SFP+ transceiver or SFP+ cables. T3700G-52TQ also provides an interface card slot on the rear panel to install the expansion card (TX432 of TP-Link for example). If TX432 is installed, you get another two 10Gbps SFP+ ports.
- Page 8 Power Supply Module 1/2 One AC Power Supply Module PSM150-AC has been installed in the switch. The malfunctioned PSM150-AC can be replaced with a TP-Link power supply module of the same model. Its input voltage is 100-240V~ 50/60Hz. The AC Power Supply Module is fully hot swappable, helping to ensure no system interruption during installation or replacement.
-
Page 9: Chapter 2 Preparing For Installation
JetStream Stackable L3 Managed Switch Chapter 2 Preparing For Installation Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Power Cord, One Console This Installation Guide One Switch Cable and One USB Cable... - Page 10 JetStream Stackable L3 Managed Switch Please keep a proper temperature and humidity in the equipment room. Too high/low humidity may lead to bad insulation, electricity leakage, mechanical property changes and corrosions. Too high temperature may accelerate aging of the insulation materials and can thus significantly shorten the service life of the device.
-
Page 11: Installation Tools
JetStream Stackable L3 Managed Switch enough to damage electronic devices, more effective lightning protection measures should be taken. Ensure the rack and device are well earthed. ■ Make sure the power socket has a good contact with the ground. ■ Keep a reasonable cabling system and avoid induced lightning. - Page 12 JetStream Stackable L3 Managed Switch The Installation & Connection flow is shown as the following figure. Figure 2-2 Installation & Connection Flow Start Install the switch to the specified position Connect to the ground Install Interface Card/ Power Supply Module? Install the Interface Card/ Power Supply Module Verify installation...
-
Page 13: Chapter 3 Installation
JetStream Stackable L3 Managed Switch Chapter 3 Installation Installing the Switch on a Desktop To install the switch on the desktop, please follow the steps below: 1. Set the switch on a flat surface strong enough to support the entire weight of the device with all fittings. -
Page 14: Installing & Removing The Power Supply Module
JetStream Stackable L3 Managed Switch 3. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack, as illustrated in the following figure. Figure 3-3 Rack Installation Rack Caution: Please set 5 to 10cm gaps around the device for air circulation. ■... -
Page 15: Installing & Removing The Interface Card (Optional)
JetStream Stackable L3 Managed Switch Figure 3-4 Removing the Protective Cover 3. Grip the handle of the module by one hand, and hold the bottom of the module by the other hand, as shown in the following figure. Then gently push the module in along the slot guide rail until the module is flush with the switch. -
Page 16: Stacking Using Interface Card On Rear Panel
M1 and M2 (port 1/1/1 and 1/1/2 on the GUI). Remember to click Save Config after the configuration. 3. Power off the switches, and then connect a 10G SFP+ cable (TXC432-CU1M/TXC432-CU3M of TP-Link for example) between each pair of Interface Cards among the switches, thus forming a Installation... - Page 17 5. You can access to any member of the stack via Web/SSH/Telnet/Console connection, thus to manage all the switches in the stack. Caution: In the process of using TP-Link SFP+ Cables, please never bend them into a radius of 45mm (1.77 inch) or less, because it may permanently damage the SFP+ Cables.
-
Page 18: Cabling Reasonably
JetStream Stackable L3 Managed Switch Chapter 4 Lightning Protection Cabling Reasonably In the actual network environment, you may need cable outdoors and indoors, and the requirements for cabling outdoors and indoors are different. A reasonable cabling system can decrease the damage of induced lightning to devices. - Page 19 JetStream Stackable L3 Managed Switch Requirements for Cabling Indoors ■ When cabling indoors, keep a certain distance away from the devices that may cause high- frequency interferences, such as down-conductor cable, powerline, power transformer and electromotor. The main cable should be paved in the metal raceway of the access shaft. When cabling, keep the ■...
-
Page 20: Connect To Ground
JetStream Stackable L3 Managed Switch Device Min Distance (m) Switch case 1.00 Transformer room 2.00 Elevator tower 2.00 Air-conditioner room 2.00 Connect to Ground Connecting the device to ground is to quickly release the lightning over-voltage and over-current of the device, which is also a necessary measure to protect the body from electric shock. In different environments, the device may be grounded differently. -
Page 21: Equipotential Bonding
JetStream Stackable L3 Managed Switch Figure 4-2 Connecting to the Ground Switch (Rear Panel) AC Power Cord (with PE cable) Note: The figure is to illustrate the application and principle. The power plug you get from the package ■ and the socket in your situation will comply with the regulation in your country, so they may differ from the figure above. -
Page 22: Use Lightning Arrester
JetStream Stackable L3 Managed Switch Figure 4-3 Equipotential Bonding Grounding Terminal Equipotential Bonding Cable Ground Cable Grounding Bar When equipotential bonding, please note that the cable should be copper wrapped Kelly with its area being 6mm at least. The shorter cable the better, and use a grounding bar to establish an equipotential bonding point. - Page 23 JetStream Stackable L3 Managed Switch Figure 4-4 Equipotential Bonding Grounding Terminal Equipotential Bonding Cable Ethernet Cable Signal Lightning Arrester Device Note: Signal lightning arrester is not provided with our product. If needed, please self purchase it. Lightning Protection...
-
Page 24: Ethernet Port
JetStream Stackable L3 Managed Switch Chapter 5 Connection Ethernet Port Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows. Figure 5-1 Connecting the RJ45 Port RJ45 Port RJ45 Cable SFP/SFP+ Port Connect an SFP transceiver to the SFP port, or connect an SFP+ transceiver/cable to the SFP+ port. -
Page 25: Verify Installation
JetStream Stackable L3 Managed Switch Figure 5-3 Connecting the RJ-45 Console Port Connect the USB Console port of the device with your computer by the USB cable as the following figure shows. Figure 5-4 Connecting the USB Console Port You can also manage the device through the console port, for details please refer to the CLI Reference Guide on the resource CD. -
Page 26: Power On
JetStream Stackable L3 Managed Switch Power On After the Power Supply Module (PSM150-AC for example) is installed on the switch, please plug the female connector of the provided power cord into the power socket of the device, and the male connector into a power outlet as the following figure shows. -
Page 27: Chapter 6 Configuration
JetStream Stackable L3 Managed Switch Chapter 6 Configuration Configure the Switch via GUI 1. To access the GUI of the switch, open a web browser and type the default management address http://192.168.0.1 in the address field of the browser, then press the Enter key. Figure 6-1 Web Browser Note:... -
Page 28: Configure The Switch Using Cli
The Micro-USB connector takes precedence over the RJ-45 connector. Install the TP-Link USB Console Driver if you are using the USB serial port for the first time on a Windows-based PC. The driver can be found on the attached CD and Download page of our official website. - Page 29 Stop bits: 1 ■ Flow control: none ■ 5. The DOS prompt ”T3700G-52TQ>” will appear after pressing the Enter button as Figure 6-4 shows. It indicates that you can use the CLI now. Figure 6-4 Log in to the Switch Logon by Telnet ■...
- Page 30 JetStream Stackable L3 Managed Switch Figure 6-6 Connecting the Switch 4. Type the default user name and password (both of them are admin), then press the Enter button so as to enter User EXEC Mode. Figure 6-7 Enter into the User EXEC Mode For detailed CLI configuration instructions, please refer to the CLI Reference Guide on the resource Configuration...
-
Page 31: Appendix A Troubleshooting
JetStream Stackable L3 Managed Switch Appendix A Troubleshooting Q1. What should I do if I forget the username and password for the switch? Connect the console port of the PC to the console port of the switch and open a terminal emulation program. -
Page 32: Appendix B Hardware Specifications
JetStream Stackable L3 Managed Switch Appendix B Hardware Specifications Item Content IEEE802.3, 802.3i, 802.3u, 802.3ab, 802.3z, 802.3ae, 802.3ad, 802.3x, 802.1p, Standards 802.1q, 802.1x, 802.1d, 802.1s, 802.1w 10Base-T: UTP/STP of Cat. 3 or above 100Base-TX: UTP/STP of Cat. 5 or above 1000Base-T: 4-pair UTP (≤100m) of Cat. -
Page 33: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 34: Industry Canada Statement
Industry Canada Statement CAN ICES-3 (A)/NMB-3(A) Explanation of the symbols on the product label Symbol Explanation AC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/ EU in order to be recycled or dismantled to minimize its impact on the environment. - Page 36 QR code. The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public License (“GPL”). As applicable, the terms of the GPL and any information on obtaining access to the respective GPL Code used in TP-Link products are available to you in GPL-Code-Centre under (http://www.tp-link.com/en/support/gpl/). The respective programs are distributed WITHOUT ANY WARRANTY and are subject to the copyrights of one or more authors.