Chelsio T5 Installation And User Manual page 41

Chapter I. Chelsio Unified Wire
1. To erase Option ROM from adapters on all the nodes, run the following command:
PS C:\Users\Administrator> .\ChelsioUwire-x.x.x.xx.exe -action
eraseoptionrom
2. Erasing Option ROM is possible only if the adapters were flashed using this installer. Click
Yes to continue.
3. Option ROM will now be erased from adapters on nodes present in the OptionROM group.
Figure 4.3 (b) – Erasing option ROM on remote nodes
Chelsio T5/T4 Unified Wire for Windows
Figure 4.3 (a) – Starting option ROM erasing
41