Chelsio T5 Installation And User Manual page 25

Chapter I. Chelsio Unified Wire
13. Click Finish to exit from the Unified Wire Installer.
3.2.2. CLI mode (Silent Installation)
To install drivers using this feature, open command prompt and execute the following
command:
C:\Users\Administrator>ChelsioUwire-x.x.x.xx.exe –in <driver(s)>
E.g.:
C:\Users\Administrator>ChelsioUwire-x.x.x.xx.exe –in all
The above command will install all the drivers/software.
To know more about other parameters and options, execute the following command:
C:\Users\Administrator>ChelsioUwire-x.x.x.xx.exe -help
Chelsio T5/T4 Unified Wire for Windows
Figure 3.2 (o) – Finishing Unified Wire installation
25