Before First Use - Zanussi ZWF 81243W User Manuals

Hide thumbs Also See for ZWF 81243W:
Table of Contents

Advertisement

OPTIONS
TEMP
With this option you can change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature comes on.
SPIN
With this option you can change the default spin
speed.
The indicator of the set speed comes on.
RINSE HOLD
Set this option to prevent the laundry creases.
The related indicator comes on.
There is water in a drum when the
programme completes. To drain the
water refer to 'At the end of the
programme'.
QUICK
Press this button to decrease the programme
duration.
SETTINGS
CHILD LOCK
With this option you can prevent that the children
play with the control panel.
To activate/deactivate this option, press
Temp and Spin at the same time until the
indicator
comes on/goes off.
You can activate this option:
After you press Start/Pause: the options and the
programme knob are locked.
Before you press Start/Pause: the appliance
cannot start.
ACOUSTIC SIGNALS
The acoustic signals operate when:
The programme is completed.

BEFORE FIRST USE

1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
10
Set this option for items with light soil or items to
refresh.
EXTRA RINSE
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
DELAY START
With this option you can delay the start of a
programme from 30 minutes to 20 hours.
The display shows the related indicator.
DOOR LOCKED INDICATOR
The indicator
shows when the door can be
opened:
The indicator is on: the door cannot be opened.
The indicator flashes: the door is opening in
some minutes.
The indicator is off: the door can be opened.
The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press Rinse Hold and Quick at the same time for 6
seconds.
If you deactivate the acoustic signals,
they continue to operate when the
appliance has a malfunction.
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.
To activate/deactivate this option touch the
buttons Rinse Hold and Extra Rinse at the same
time until the indicator of Extra Rinse button
comes on/goes off.
This removes all possible dirt from the drum and the
tub.

Advertisement

Table of Contents
loading

Table of Contents