ProForm DTL42950 User Manual page 8

5. Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire on the Console Base
to the indicated small hole in the Left Handrail with the
Silver Ground Screw (75).
6. Set the Console Base (47) on the Left and Right
Handrails (71, 72).
Slide a Handrail Washer (100) and a Plastic Spacer
(115) onto a 2" Screw (117), and insert the Plastic
Spacer and the Screw into the hole in the bottom of the
Right Handrail (72) as shown. Start the Screw into the
Console Base, but do not tighten it yet.
Repeat this step with the Left Handrail (71).
7. Press a Handrail Endcap (116) into the end of the Left
Handrail (71). Start a 3/4" Screw (2) into the Handrail
Endcap and the Console Base, but do not tighten the
Screw yet.
Repeat this step with the other Handrail Endcap (116) and
the Right Handrail (72).
Tighten the two 3/4" Screws (2) and the two 2" Screws
(117); being careful not to overtighten the Screws.
5
Small
Hole
71
6
115
71
7
116
72
2
117
8
Ground
Wire
47
75
100
117
47
72
100
47
71
117
115
117
116
2