Table of Contents
Advertisement
Instruction Manual
PLACING A DISPATCH CALL
1 Select the desired system and group using the System and Group keys.
2 Press the PTT Switch
3 If a tone does not sound, communication is possible; start speaking into the
microphone. Release the PTT switch to receive.
• For best sound quality at the receiving station, hold the microphone
approximately 1.5 inches (3 ~ 4 cm) from your mouth and talk across the
microphone not directly into it.
4 When your conversation is finished, return the microphone to the hang up clip.
RECEIVING A DISPATCH CALL
1
Select the desired system and group using the System and Group keys. (If
the Scan function has been programmed, it can be switched ON or OFF as
desired.)
2
When the dispatcher's voice is heard, readjust the volume as necessary.
TRUNKED OPERATION
Page 24 of 25
Advertisement
Table of Contents
