ProForm Crosswalk PFTL56007.0 User Manual page 7

2. Hold the Right Upright (107) against the Base
(108). Be careful not to pinch the Wire
Harness (77).
Attach the Right Upright (107) to the Base (108)
with a 1" Upright Bolt (106), a 2 3/4" Upright Bolt
(105), and two 3/8" Star Washers (23). Do not
fully tighten the Upright Bolts yet.
3. Attach two Base Pads (82) to the Base (108)
with two 1" Tek Screws (83) as shown.
Insert an Extension Leg (89) into the Base (108)
as shown. Hold two Extension Leg Nuts (67) in
the bottom of the Extension Leg. Next, insert
two Extension Leg Bolts (65) into the top of the
Extension Leg, and firmly tighten the Extension
Leg Bolts into the Extension Leg Nuts.
4. With the help of a second person, carefully tip
the treadmill onto its other side. Partially fold the
Frame (58) so the treadmill is more stable. Do
not fully fold the Frame until the treadmill is
completely assembled.
Attach the Left Upright (84) to the Base (108)
with a 1" Upright Bolt (106), a 2 3/4" Upright Bolt
(105), and two 3/8" Star Washers (23). Do not
fully tighten the Upright Bolts yet.
2
107
3
65
4
108
23
105
106
7
108
77
108
82
67
89
84
58
23
105
106
82
83