Wiring Example; When An External Speaker Output Is Used; When Loads Are Controlled By The Control Output - Panasonic Melody Week Instruction & Installation Manual

Wiring example

When an external speaker output is used

Only a single external speaker can be connected.
Power
supply
When loads (bell, buzzer, siren, etc.) are controlled by the control output
In the case of using the channel 1
Power +---
supply
Power----�
supply
Power
supply - -- ��..u-,.,,"�r....:-...
Power - - - +-�
supply
Note: Remove jumper lines which are indicated by a dotted line and connected between the terminals of the
electro-magnetic switch. If the jumper lines are connected as it is, the Melody Week is not operated properly.
Forearthterminal
-
-------+
Loads
-31-
External speaker
(80, 3W or more)
Power
supply
Power-------+---1-0-n
supply -n.,-"'-'- - •
•
Power.._ ____ .:+r-.-n"n
supply --- ------' "'-'""l--n
Loads