Advertisement
Note: Place the paper into the position as shown in images below to start cutting
paper.
MAINTENANCE
Clean guillotine with a dry cloth. Never use solvents or water. To prolong the life
of the blade, it is recommended to regularly wipe it down with silicone fluid, liquid
Vaseline or other rust-preventative oil.
Should the blade loosen, follow the 2 below steps to tighten the blade:
[A] Use a screwdriver to dismantle the grey part as shown in the image below.
[B] Use a hex screwdriver to tighten the screw bolt with one hand, while using a
wrench to hold the nut in place with the other hand. See image below.
3/4
Advertisement
