Page 1
Instruction Manual J.Burrows 4-in-1 A4 Paper Cutter JBMT401 Version: 201709 Aluminum Tracker Extension Arm Paper-clamping Bar Cutting Head Read all instructions before use. Keep for future reference. Officeworks Ltd. I 236-262 East Boundary Road I East Bentleigh I 3165 I AUSTRALIA...
Page 2
J.Burrows 4-in1 Paper Cutter Model JBMT410 Max. paper size Cutting length 300 mm Max cutting capacity of straight blade 5 sheets (80gsm paper) Max cutting capacity of perforation blade 5 sheets (80gsm paper) Max cutting capacity of wave blade 3 sheets (80gsm paper)
Page 3
Note:Image 2 shows the wrong position of the blade Image 2 Insert the paper under the transparent paper-clamping bar. Hold the cutting head as shown in Image 3 below by clamping the lid firmly with your thumb,index finger and middle finger. Press down the cutting head and slide the blade along the aluminum tracker to trim the paper.
Page 4
Note: Image 4 shows an incorrect way of holding the cutting head. Improper operation may cause the blade to switch to another blade. Image 4 NOTE Using more than the recommended amount of paper could cause permanent damage to the blade. This product is intended for cutting of paper.