Advertisement
fallen on the apparatus, the apparatus has been dropped, the apparatus has been
exposed to rain or moisture.
22. The marking information is located at the back of the apparatus.
23. Minimum distance 5 cm around the apparatus for sufficient ventilations
24. Do not place any flame sources such lighted candles on top of the apparatus.
25. Attentions should be drawn to the environmental aspects of batteries disposal.
26. Use the apparatus in moderate climates.
ELECTRIC SUPPLY
1. Please unplug the product in case of prolonged non‐use.
2. If the supply cable is damaged, it must be replaced by the manufacturer or qualified
after‐sales personnel to avoid any danger.
3. This product must be connected to an electrical supply 100‐240V ~ 50/60Hz.
4. The plus must be accessible after installation.
5. Hold the plug well when you plug the power cord in or out.
6. Please do not put the AC power cord near any heat source equipment.
7. Please do not place any heavy objects on the AC power cord.
8. Please do not overhaul the AC power cord.
9. This product contains a low power laser device. In order to keep safety, please do not
open the unit to expose the inside parts. If there is some problem need to be repaired,
please let the professional people check and repair it.
CAUTION
1. Use of controls and adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
2. If this product develops trouble, contact qualified service centers, and do not use the
product in defective states.
BEFORE USE
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close
to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold
or moisture. Keep away from sources that hum, such as transformers or motors.
2. Do not open the cabinet as this might result in damage to the circuitry or electrical
shock. If a foreign object should get into the set, contact your dealer.
4
Advertisement
