Vehicular Battery Charger; Installing The Vehicular Battery Charger; Removing The Vehicular Battery Charger; Vehicular Battery Charger Operating Specifications - Motorola iDEN i500plus User Manual

Digital multi-service phone

Hide thumbs Also See for iDEN i500plus:

Table of Contents

D R A F T

Vehicular Battery Charger

The NTN8978 Vehicular Battery Charger (VBC) enables in-vehicle

communications by charging the NiMH battery to provide power to

your i500plus.

The power light (green LED) turns on when the Vehicular Battery

Charger is receiving power.

Cigarette Lighter Adapter

Figure 4. Installing the Vehicular Battery Charger

1. Insert the Vehicular Battery Charger's plug into the accessory

charger connector on the side of the phone. Push firmly until the

plug rests securely in the accessory charger connector.

2. Remove the vehicle's cigarette lighter plug (if one exists) from the

cigarette lighter receptacle.

3. Plug the Vehicular Battery Charger's cigarette lighter adapter into

the cigarette lighter receptacle. The power light (green LED) will

turn on.

While your i500plus is attached to the Vehicular Battery Charger, you

can leave the phone off, turn it on, or use it. For best results, turn it off.

1. Unplug the Vehicular Battery Charger's cigarette lighter adapter

from the vehicle's cigarette lighter receptacle.

2. Gently pull the plug from the accessory charger connector on the

side of the phone.

Operating voltage range: 10.8 - 33.0 Vdc.

Operating temperature range: -30°C to +60°C

Plug

Accessories

Table of Contents