Option 3: Set Up Wireless Connection To A Wps Router Directly - Philips SW100M User Manual

Option 3: Set up wireless
connection to a WPS router
directly
1
As instructed on the app, press and hold
WPS on the back of the audio adapter for
more than 3 seconds.
» The Wi-Fi status indicator on the WPS
button blinks green.
WPS
12 EN
2
Press the WPS button on your home
Wi-Fi router.
WPS
3
Wait until successful connection of the
speaker to your home Wi-Fi network.
» The Wi-Fi status indicator on the WPS
button turns off.
» The system status indicator on the
front panel turns solid green.
Tip
•
Only WPA and WPA2 are supported. If the wireless
security is WEP or no security is applied, the WPS
method does not work.
•
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.