Subscribe to Our Youtube Channel
Related Manuals for MCE Technologies Xcarét Pro-99
Summary of Contents for MCE Technologies Xcarét Pro-99
-
Page 1: Installation Guide
POWERBOOK PRODUCTS Xcarét Pro-99 Expansion Bay Hard Drive Kit Installation Guide http://www.mcetech.com... - Page 2 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit Introduction Thank you for purchasing an MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit! We are sure that your new device will enrich your PowerBook computing experience. If at any time you are unsure about or are having difficulty with the installation or use of your new product, you may request assistance by calling (949)458-0800 or by sending an email to support@mcetech.com.
- Page 3 2 2 2 2 2 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit Preparing to Install List of Items Before beginning installation of your hard drive into the Xcarét Pro-99 Expansion Bay Hard Drive Kit, remove the single screw securing the Kit’s top to its bottom and check the contents of the package to ensure that all required components are present: a.
- Page 4 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit aside the Kit Base. DO NOT pull on the LED wires attached to the Drive Connector, as this may cause permanent damage! If the LED slips out of its front-panel slot, simply rein- sert it so that the front of the LED is flush with the front panel of the Kit Base.
- Page 5 4 4 4 4 4 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit Step 5: To secure the hard drive to the Drive Bracket, screw the four silver bevel- headed screws into the sides of the bracket/drive assembly. Step 6: Carefully attach the Drive Connector to the hard drive as shown here.
- Page 6 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit Step 8: Secure the Drive Bracket to the Kit Base by screwing four flat-headed screws into the mounting posts of the Kit Base. Note: Do not overtighten the screws onto the mounting posts, as this may nullify the shock-dampening effect of the rubberized ends of the posts.
- Page 7 6 6 6 6 6 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit Step 11: Next, place the black Kit Top onto the Kit Base. Notice the alignment groove located on the inside rear of the Kit Top. This is where the top of the green IC board of the Drive alignment groove...
- Page 8 MCE Xcarét Pro-99 Expansion Bay Hard Drive Kit screws Caution: Do not overtighten the top screws. The top of the screws should sit flush with the rest of the Kit Top surface. You may have to make some fine adjustments to the screw tightness to ensure a uniform fitting of the Kit Top to the Kit Base.
- Page 9 © 2000 Mac Components Engineered MCE, the MCE logo and Xcarét Pro are trademarks of Mac Compo- nents Engineered. Apple, the Apple logo, Mac, the MacOS logo, Macintosh, and Pow- erBook, are registered trademarks of Apple Computer, Inc. Products and company names are trademarks of their respective com- panies, and are mentioned for informational purposes only and con- stitute neither an endorsement nor a recommendation.
Need help?
Do you have a question about the Xcarét Pro-99 and is the answer not in the manual?
Questions and answers