GMC Terrain 2018 Manual page 47

Hide thumbs Also See for Terrain 2018:
Table of Contents

Advertisement

46
Phone
8. If the vehicle does not appear
on your cell phone, there are a
few ways to start the pairing
process over.
Turn the cell phone off and
then back on.
Go back to the beginning of
the Phone menus on the
infotainment display and
restart the pairing process.
Reset the cell phone, but
this step should be done as
a last-effort.
9. If the cell phone prompts to
accept connection or allow
phone book download, touch
Always Accept and Allow. The
phone book may not be
available if not accepted.
10. Repeat Steps 1 8 to pair
additional cell phones.
First to Connect Paired Phones
If multiple paired cell phones are
within the range of the system, the
system connects to the paired cell
phone that is set as First to
Connect. To enable a paired cell
phone as the First to Connect
phone:
1. Make sure the cell phone is
turned on.
2. Touch Settings, then touch
System.
3. Touch Phones to access all
paired and all connected cell
phones and mobile devices.
4. Touch the information icon to
the right of the cell phone to
open the cell phone s
settings menu.
5. Touch the First to Connect
option, to enable the setting for
that device.
Cell phones and mobile devices can
be added, removed, connected, and
disconnected. A sub-menu will
display whenever a request is made
to add or manage cell phones and
mobile devices.
Secondary Phone
A cell phone can be enabled as a
Secondary Phone by touching the
information icon to the right of the
paired cell phone name to open the
phone settings menu. If a cell phone
is enabled as a Secondary Phone, it
can connect simultaneously
alongside another Bluetooth mobile
device. In doing so, the Secondary
Phone will be labeled as Incoming
Calls. This means the mobile device
can only receive calls. The Address
Book of a Secondary Phone will not
be available and hands-free
outgoing calls cannot be placed
using this cell phone.
If needed, touch the Secondary
Phone while in the Phones list to
swap it into the Outgoing and
Incoming role. This role makes it
possible to place outgoing calls from
the Contacts and Recents list.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Terrain tenali 2018

Table of Contents