GMC Terrain 2018 Manual page 41

40 Voice Recognition
manually or touch the Back icon on
the infotainment display to try
again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was
initiated.
The Back Command
Say Back or touch the Back icon
on the infotainment display to go to
the previous display.
If in voice recognition, and Back is
spoken all the way back to the
starting display, and then Back is
spoken one more time, the voice
recognition session will cancel.
Help
Say Help on any voice recognition
display and the help prompt for the
display is played.
Touching while the help prompt is
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
Radio
If browsing the audio sources when
voice is touched, the voice
recognition commands for AM, FM,
and SiriusXM (if equipped) are
available.
Switch to AM : Switch bands to
AM and tune to the last AM radio
station.
Switch to FM : Switch bands to
FM and tune to the last FM radio
station.
Switch to SXM : Switch bands to
SiriusXM and tune to the last
SiriusXM channel.
Tune to <AM frequency> AM :
Tune to the radio station whose
frequency is identified in the
command (like nine fifty ).
Tune to <FM frequency> FM :
Tune to the radio station whose
frequency is identified in the
command (like one oh one
point one ).
Tune to <AM frequency> AM
HD : Tune to the HD Radio station
whose frequency is identified in the
command.
Tune to <FM frequency> FM
HD : Tune to the HD Radio station
whose frequency is identified in the
command.
Tune to <FM frequency> FM HD
<HD channel number> : Tune to
the HD Radio station whose
frequency and HD channel are
identified in the command.
Tune to SXM <SXM channel
number> : Tune to the SiriusXM
radio station whose channel number
is identified in the command.
Tune to SXM <SXM channel
name> : Tune to the SiriusXM
radio station whose channel name
is identified in the command.