Advertisement
CAUTION
This package contains small parts.
For adult assembly only.
1
• Turn the front end over.
• Fit the base to the front end.
• Insert two screws into the base and tighten.
• Turn the front end upright.
Dash
2
• Place the label exactly as shown in
the illustration to the dash.
• For best results, avoid repositioning the label
once it has been applied to the dash.
Assembly
Base
Front End
7
3
• First, fit the steering wheel into the hole in
the dash.
• Then, fit the steering wheel retainer into the
end of the steering wheel.
• Insert a screw into the steering wheel retainer
and tighten.
Front End
4
Dash
• Fit the dash to the front end.
• Insert three screws into the dash and tighten.
3
Steering Wheel
Retainer
Steering Wheel
Advertisement
