Connecting The Magnification Feature Pack To The Optelec Clearreader - Optelec ClearReader+ User Manual

Optelec
Right arrow key:
Up arrow key:
Down arrow key:
Mode button:
Menu button:

Connecting the Magnification Feature Pack to the Optelec ClearReader

Connect the Magnification Feature Pack to the ClearReader
VGA connector at the bottom rear side of the ClearReader
you will need to remove the protection cover which will also reveal two USB connectors. Use a
English
Press to navigate to the next word or to the next menu item in the menu.
During playback of the text, this button will increase the reading speed.
Press to navigate a line up in the text, or to move to the previous menu
item in the menu.
Press to navigate a line down, or to move to the next menu item in the
menu.
Square button on the left half of the remote control. Press to switch
between the 4 viewing modes: Column view, Line view, Page view and
Overview mode.
Square button marked with the character "M" on the right half of the
remote control. Press to enter and exit the menu.
+
+
and optionally, a monitor. Locate the
+
. If the VGA connector is not visible,
+
ClearReader
Page 20