Battery Replacement - Victor 2640-2 Operating Manual

BATTERY REPLACEMENT

1. Turn the AC power switch off.
2. Remove - the battery compartment cover located on the calculator bottom case.
3. Remove the old battery and install a new CR2025 or equivalent.
4. Turn on the AC power switch.
5. PRESS THE RESET BUTTON.
6. Replace the battery compartment cover.
7. Reprogram the date and time. (See page 50 & 51)
2. Battery Cover
CAUTION
1. Danger of explosion if battery is incorrectly replaced. Only replace with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturers' instructions.
2. Keep new and used batteries away from children.
3. If the battery compartment does not close securely, stop using the product and
keep it away from children.
4. If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
Bottom Case
Battery
Holder
- 5 -
3. Battery
5. Reset Switch