Table of Contents
Advertisement
4. See HOW TO LOWER THE TREADMILL FOR USE on
page 21. Follow the instructions on page 21 to lower the
treadmill.
Cut the two shipping ties from the Right and Left
Handrails (72, 73).
5. Align the hole in the lower end of the right Handrail Arm
(10) with the hole in the frame tab as shown. Attach the
Handrail Arm with a Handrail Bolt (7) and a Handrail Nut
(8).
Repeat this step on the left side.
6. Remove the backing from the Adhesive Clip (91). Press
the Adhesive Clip onto the base of the Uprights (70) in
the indicated location. Press the Allen Wrench (92) into
the Adhesive Clip.
7. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a
mat under the treadmill. To order a mat, see the back cover of this manual.
4
5
8
6
6
Shipping
Ties
73
72
10
Frame Tab
92
91
70
7
Advertisement
Table of Contents
