Advertisement
DRONE PARTS
Propeller Guard
Drone Cover
Housing
Left
Propeller Guard
A Propeller
B Propeller
8
Front
Camera
Propeller Guard
Right
Propeller Guard
Switch
Rear
Front LED (Green)
B Propeller
Drone Bottom
Housing
A Propeller
Rear LED (Red)
CHARGING THE DRONE'S BATTERY
The Zoom Bee™ Drone includes a rechargeable Lithium-Polymer battery . Charge the
battery before first use .
To charge the drone's battery:
1 .
Ensure that the drone's power switch is in the
OFF position .
2 .
Insert the charging cable's connector into the
port on the rear of the drone .
3 .
Insert the charging cable's USB connector
into a USB port on an active device, such
as a computer, USB adapter, or power bank .
For fastest charging, us a device with 5V 2A
output current (not included) .
4 .
The USB indicator is red while charging, and turns green when the drone is fully
charged .
INSERTING THE CONTROLLER BATTERIES
The controller uses 3 AAA batteries (included) which must
be inserted before first use .
To insert the controller's batteries:
1 .
Open the battery cover on the back side of the
controller .
2 .
Insert 3 AAA batteries, following the polarity indicators .
Battery Cover
3X1.5V
Alkaline Bat
9
Advertisement
