Installing The Power Cord - Sobro Coffee Table User Manual

INSTALLING THE POWER CORD

X 1
Back - mesh
Front - drawers
Step One Step Two
WARNING: Do not attempt to install The power socket is located on the
the power cord until the legs are underside of the Sobro Coffee Table
installed. towards the back right corner.
Have one partner lift the right side* of Locate the socket and unwrap the
the Sobro table off the ground. Rest power cord before attaching.
the opposing side on a foam insert or
cushion for protection.
* USE PROPER LIFTING TECHNIQUE
(Refer to: webmd.com/back-pain/proper-lifting-technique) If you have a history of back pain or injury, do not attempt to lift table.
Sobro (Storebound, LLC) will not accept responsibility for any injury that may occur during set up process.
16 ∙ installing the power cord
Grounding Instructions:
This appliance must be plugged into a grounded socket. The power cord that is supplied with the
appliance contains the appropriate grounding conductor and grounding plug.
The plug must be inserted into a wall outlet that has been grounded in accordance with the existing
local codes and ordinances. The required nominal voltage and frequency are indicated on the rating
label. Consult a qualified electrician for other concerns.
Step Three Step Four
Plug in the adaptor end of the After installing the legs or moving
cord to the socket in the indicated the Sobro, you must let the
location above. refrigerator coolant settle for a
minimum of 4 hours before plugging
in the Sobro.
WE REPEAT: Do not plug in
the Sobro Coffee Table until
4 hours have passed.
page title ∙ 17